HYDRO - Teplogidravlichesky calculation of heating systems

HYDRO - Teplogidravlichesky calculation of heating systems

the price - 35400 rub + the cost of a protective key is 1000 rub.

KLAPAN - Module of calculation of balance sheet valves

the price - 11800 rub.

Software package ING-TV of http://www.ing-tv.ru/

CERTIFICATE

Certificate of conformity No. ROSS RU.SP15. H00238 of Gosstandart of Russia.

APPOINTMENT AND SCOPE

The program teplogidravlicheskogo calculation of heating systems with artificial and natural circulation of the heat carrier.

a) artificial circulation: odnotrubnye and dvukhtrubnye, vertical with upper and lower distributing of trunks, horizontal, overturned.

Schemes of the movement: deadlock, passing, mixed.

Armature: the 3rd running, the 2nd running, flowing, it is possible to consider systems odnotrubnye and dvukhtrubnye with installation of temperature regulators (in base thermostatic regulators of firms are put: "DANFOSS", "HERZ", "HONEWEYLL", "TA HIDRONICS ‛, "OVENTROP", LANDIS, "COMAP" (France).

Heating devices:

• pig-iron and steel radiators (MS - B - RSV,RSG2, KOMPAKTY, KALIDORY);
• RS-500, RSN-500 (Stupino), PURMO (Polish), RSV-9 (Pskov), RN, RSB Cymric section devices (Santekhprom).
• convectors (UNIVERSAL, UNIVERSAL-S, UNIVESAL-TB, KOMFORT-20, AKKORD, PROGRESS, VEL companies (KN), ISOTHERMS, ISOTHERMS (warm track);
• coils from smooth steel pipes two-row and four-row,

Du =40, Du =50, Du =65, Du =80, Du =100;

• Import devices: "KALIDOR", "PURMO", KERMI", "FOGJEL-NOTT", RADIK ‛, RADIK-KLASSIK ‛ (KORADO), DEKATERM ‛, MANAUT ‛, Turkish steel and pig-iron radiators.
• Bimetallic (Opera - Italy)

The base of heating devices is open for replenishment and adjustment.

Calculation is conducted with variable difference of temperatures. Rings of a system coordinate due to change of diameter of stoyakovy section on height and at the expense of horizontal junction points of a strut to the trunk.

A system can be considered with the appointed diameters of stoyakovy and trunk sections. The legal number of ztazhestoyak on a strut is defined by a condition of not boiling up of the heat carrier and allowable pressure on the heating device of a lower floor. The legal number of struts - is not limited (is defined by existence of free operational memory).

Numbering of stoyakovy and trunk sections any.

In process of filling of initial data and corrections of a system after calculation introduction and an exception of stoyakovy and trunk sections is made without change of encoding of the described scheme.

b) natural circulation;

are calculated odnotrubnye and dvukhtrubnye systems with upper distributing; schemes of the movement deadlock, passing, mixed. Armature: the 2nd running, flowing.

The heating devices listed above. Calculation is conducted in three stages:

• The 1st stage - hydraulic determination of diameters of pipelines, true flow distribution in a system, the preliminary surface of heating of devices;
• The 2nd stage - thermal calculation of a system for the appointed diameters;
• The 3rd stage - coordination of hydraulic and thermal results of calculation.

The principle of filling of initial data same, as for systems with artificial circulation of the heat carrier. Are result of calculation: diameters of pipelines, surface of heating devices, power of a heating boiler, specification of materials and equipment.

At introduction to calculation of the executive scheme, it is possible to analyze system operation and to enter adjustment by replacement of diameters on some sections or redistribution of loadings on separate branches of trunks.

The program klapan ‛ works based on the ‛HYDRO program ‛.

Valves are appointed to struts and trunks of a system, the preliminary pressure upon a system taking into account operation of valves is established, setup provisions of each valve are defined. Results are printed in a tabular style.

The order of the program is sibinfox@sibinfox.ru