Equicom PING2-L

The PING2-L Equicom device is intended for serviceability check of Ethernet segments of networks  (SNMP and SNMP Trap). Using additional sensors it is possible to control: access to the server, presence of tension, smoke and leakage of water. These devices are shapers of test UDP packets with support of the IEEE 802.1Q VLAN tags, the possibility of acceptance of packets is absent.  For acceptance and the analysis of UDP of packets  the free PINGSTAT program (Linux 32/64, FreeBSD 32/64) is offered which acts as SNMP the agent also creates the web page. Through SNMP it is possible to integrate with the managing systems, such as Zabbix , Nagios, MRTG, Cacti , PRTG Network Monitor, Tivoli, HP OpenView, Wratsup, Big Brother, Castle Rock, OpenNMS, etc. 

For setup of parameters the device is connected to COM port of the computer by means of special PING2-RS232 cable, for configuring any terminal program  can be used. a byudzhetny resheniye for averages and large projects.  the Device has dimensions 48 x 42 x 22 mm and weight only 25 gr. that allows to place it practically in any place.  the Network adapter is not included in the device delivery since it is possible to use the power supply from switch (12B).  This device consumes not enough energy.

There are two more modifications of the device with a temperature sensor connectivity: PING2 and PING2-knock, they differ only in existence in PING2-knock the shock sensor. Equicom device of monitoring of temperature

The description of the sensors connected to the device:

Sensor of existence 220B

Joins before the uninterruptible power supply unit (UPSU). It can detect and announce (SNMP a ladder )  availability and power losses of the main accumulators. If you usually face voltage drops and if you want to be warned before your UPS is switched-off, then this sensor will help you.

Sensor of opening / closing

The wire sensor of opening of a door (sealed-contact) is the magnetocontact annunciator intended for blocking of door and window openings and also other structural elements of buildings and constructions.  It is connected to any idle line of the Equicom device and does not require in addition a power supply.

Possible places of use of the Equicom device :

Anti-vandal cabinets, telecommunication cabinets and racks, in the data processing centers (DPC), server premises, different service premises, hospitals, laboratories, warehouses, the gas, oil, mining industry...

Hardware features

• 4 digital inputs for connection of two-level sensors: opening of a door, breaking glass, movement, fire warning, etc.
• Port 10Base-T Half duplex – works only for transfer, the possibility of acceptance of packets is absent
• LED indication of transfer of packets
• The timer which is built in by Watchdog
• Supply voltage +8.16B, the maximum power consumption is 0.4 W



Set for remote monitoring of tension in network 220B

The set consists of the EQUICOM PING2-L device and the sensor of existence of network 220v (further Sensor). This simple, and, above all cheap solution is ideal for different projects. Since the small systems for the smart house (as was written to pass earlier) and for the big enterprises (industrial, Internet service providers, etc.).

Set for remote monitoring of tension in http://www.equicom.ru/monitoring/1-monitoring-ping.html network 220B

The set consists of the EQUICOM PING2-L device and the sensor of existence of network 220v (further Sensor). This simple, and, above all cheap solution is ideal for different projects. Since the small systems for the smart house (as was written to pass earlier) and for the big enterprises (industrial, Internet service providers, etc.).

Hardware features of Equicom PING2-L:

- 4 digital inputs for connection of two-level sensors: opening of a door, breaking glass, movement, fire warning, etc.

- Port 10Base-T Half duplex – works only for transfer, the possibility of acceptance of packets is absent

- LED indication of transfer of packets

- The timer which is built in by Watchdog

- Supply voltage +8.16B, the maximum power consumption is 0.4 W

The device has an end-to-end power supply +8.16B it allows to connect the power supply for example from the switch in the device, and a cable proceeding from the device already in the switch. The sensor is connected to free brands. The device has dimensions 48 x 42 x 22 mm and weight only 25 gr. It is possible to fix the device on site using a double-sided adhesive tape or glue. The set is built and ready to work. Now it is necessary to configure the device for this purpose there is detailed instruction. Download (rus, pdf, 400 kb)

Principle of work:

The device generates udp a packet---> the computer with the pingstat program (SNMP the agent for PING2 series devices)---> the program generates SNMP packets and also from "box" to receive here such web page to look. Through SNMP it is possible to integrate with the managing systems, such as Zabbix , Nagios, MRTG, Cacti , PRTG Network Monitor, Tivoli, HP OpenView, Wratsup, Big Brother, Castle Rock, OpenNMS, etc. 

Possible places of use of the Equicom device :

Anti-vandal cabinets, telecommunication cabinets and racks, in the data processing centers (DPC), server premises, different service premises, hospitals, laboratories, warehouses, the gas, oil, mining industry...