TDK-Lambda Z+

TDK-Lambda Z+800

TDK-Lambda Z + - programmable direct current power sources of the increased power - Z+800.

On July 10, 2013 the press service of TDK corporation announced expansion of a series of programmable TDK-Lambda Z direct current power sources + models of the increased Z+800 power.

Functionality

The 800 W programmable power supplies have the feature set similar to modifications of smaller power of Z+400 and Z+200. the 5-year guarantee is provided. New models are aimed at satisfaction of demand with research laboratories in high-quality power sources in desktop execution. The TDK-Lambda Z+800 models saved dimensions of modifications of Z+200 and Z+400 that provided the highest indicator of power density.

Flexibility of installation/installation

New blocks can be used as separate modules, and to be mounted in a rack. It does them by the ideal choice for installation in racks 2U high when using in the automatic test equipment and in the equipment of OEM, including different instrumentations, devices of heat treatment of semiconductors and testing of components, electric power supply systems of diode lasers and heaters, HF amplifiers and the high-frequency electromagnetic equipment.

Electromechanical characteristics

Models of the 800 W Z+ series are available in modifications with the voltage output up to 100 V of a direct current and an output current to 72 A. Z+800 blocks can work as in the mode of a direct current, and constant voltage, being powered from a universal input (85-265 V of alternating current). With higher power it is possible to create systems at parallel connection to six identical blocks with active distribution of current. Serial connection of two blocks will provide a bipolar exit or increase in voltage output.

Programming

Programming of all models can be performed as via the front panel, and remotely through the USB and RS232/485 ports and also the analog interface provided in a basic equipment. The LAN and GPIB interfaces (IEEE488) and also the isolated analog programming interface are optionally available. Z+800 models conform to requirements of the standards EN55022-B, FCC (Part 15-B) and VCCI-B on the level of conducted and emitted electromagnetic interferences and also have marking of CE according to the Directive of the European Union on low-voltage equipment (LV).

Construction of Z+800 blocks conforms to requirements of UL/EN/IEC61010-1 and UL/EN60950-1 standards for electrical safety.

TDK-Lambda Z+600

The TDK-Lambda corporation announced in the summer of 2013 replenishment of a series of programmable Z+ direct current power sources the 600 W models. These programmable power sources supplement Z+200, Z+400 and Z+800 series, having the same highest functional characteristics and a 5-year guarantee.

The TDK-Lambda Z+600 series is designed to meet demand for high-quality power sources of desktop execution for research application. Having saved overall dimensions of less powerful models of a line, Z+ 600 has a high rate of power density. Of a power supply of this series are ideal for Iistochniki for embedding in 19' are resistant as a part of assemblies 2U high that does them by the optimal choice for use in the control and measuring equipment, overload tests of semiconductors, testing of components, the systems of junction lasers, heaters, HFs amplifiers and electromagnets.

Models of the 600 W Z+ series are available in modifications with the voltage output up to 100 V of a direct current and an output current to 60 A. Z+600 blocks can provide the mode of a direct current or constant voltage, working with the broad range of narpryazheniye of a power supply (85–265 V pery. current). At parallel coupling of 6 identical blocks it is possible to create systems with higher power thanks to active distribution of currents. Serial connection of two blocks will provide a bipolar exit or increase in voltage output.

Programming of all models can be performed as via the front panel, and remotely through the USB and RS232/485 ports and also the analog interface provided in a basic equipment. The LAN and GPIB interfaces (IEEE488) and also the isolated analog programming interface are optionally available. Z+600 models conforms to requirements of the standards EN55022-B, FCC (Part 15-B) and VCCI-B on the level of conducted and emitted electromagnetic interferences and have marking of CE according to the Directive of the European Union on the low-voltage equipment (LV) and the Directive of the European Union on the content of harmful substances in electronic devices (RoHS). Construction of blocks of Z+600 series provides compliance to requirements of UL/EN/IEC61010-1 and UL/EN60950-1 standards for electrical safety.