RSS
Логотип
Баннер в шапке 1
Баннер в шапке 2

InfiLINK 2x2 LITE

Product
Developers: InfiNet Wireless
Technology: Routers (routers)

Content

InfiLINK 2x2 LITE is the high-speed wireless router with the built-in two-polarizing antenna with gain 21 or 23 dB. For connections a point-to-point.

General prestavleniye

The InfiLINK 2x2 family is the latest high-performance solution for backbone networks. Has high capacity and spectral efficiency, high reliability at long distances in conditions as direct visibility (LOS), and in its absence (NLOS).

The line of InfiLINK 2x2 - a wireless system, provides capacity to 300 Mbps, a set of network functions for providing seamless integration with the existing radio and wired networks needlessly in installation of the additional hardware of third-party producers.

In the list of opportunities of the equipment - a broader service of service quality (QoS), a broadcast of flows E1/T1 and optimal system operation in the most severe climatic conditions.

Characteristics

  • Wireless infrastructure for Internet service providers (WISP);
  • Trunk channels for connection of base stations of networks 2G/3G/4G;
  • Connection the building building at Fast Ethernet speeds above;
  • Trunk channels with support of E1/T1 TDM and Ethernet;
  • Modern alternative to outdated microwave channels;
  • Connection of corporate subscribers in remote territories;
  • Channels out of direct visibility (NLOS);
  • Reliable reservation of high-speed atmospheric optical lines of communication (FSO) and connections with the millimetric wave range (radio relay stations) or fiber lines;
  • The richest set of functionality in the area;
  • Communication at distances of the exceeding 80 km;
  • Expanded temperature range (— 55 °. +60 °C).

Features of QoS

  • 16 priority queues;
  • Support of tags of IEEE 802.1p;
  • Support of IP TOS/DiffSer0v (svozmozhnostyyu'perekraski');
  • Automatic prioritizing golosovgo traffic;
  • Restriction of traffic (absolute, relative, hierarchical);
  • Redirection of traffic.

Network subsystem

Routing:

  • RIPv2/OSPFv2/static routing;

Tunneling:

  • Ethernet-over-IP, IP-over-IP);
  • IP firewall;
  • NAT (multiple groups, support of H.323);
  • DHCP client/server/repeater.

Means of protecting of data

  • Protection of access to the device by the password;
  • Protection against network storm, flood.

Monitors and managements

  • Support of SNMPv1/3 (MIB II, private MIBs);
  • The configured SNMP notifications;
  • Telnet;
  • The GUI utility (for Windows);
  • Web interface;
  • Remote Shell / Secure Shell;
  • Automatic update of the software of devices in all network.

MAC level

  • The dynamic adaptive polling - solves a problem of "the hidden nodes" and optimizes performance in networks with topology a point multipoint
  • The mode of the centralized distribution of a marker;
  • Dynamic tracking and exception of poll of low-active subscribers;

Permanent testing of the channel

  • Support of the ARP protocol;
  • MAC/IP filtering;

Full-function distributed switch of the 2nd level

  • Multiple groups of switching;
  • Support of VLAN (IEEE 802.1q);
  • QinQ support;
  • Support of the Spanning Tree protocol (STP/rSTP);
  • Optimization for video transmission;
  • Support of trunk groups.

Pseudo-radio interfaces - a unique feature for consolidation of the networks built on InfiNet Wireless devices through the equipment of third-party producers (wire Ethernet, external IP networks);

  • Ethernet-over-IP tunneling.

Radio interface

"Gluing together" of Voice/RTP of packets - for minimization of a jitter and a delay time for multimedia of applications;

  • Adjustment of time of occupation of a radio channel – for performance improvement on strongly loaded connections;
  • Automatic fine tuning of the channel to any distances, lack of logical restriction for distances;
  • Automatic control of data transfer rate — for 100% of a guarantee of a stable relation irrespective of changes of external conditions;
  • Automatic detection of distance — for optimization of delays and performance.


File:InfiLINK-2x2-LITE.jpg

2013: InfiLINK 2x2 LITE

On October 3, 2013 the InfiNet Wireless company announced alternation of generations of the subscriber equipment in the current product line. Devices of the InfiLINK 2x2 LITE and InfiMAN 2х2 family will be made on the new hardware-software platform allowing to increase radio channel performance more than twice.

The equipment gives new opportunities as the solution of "the last mile" in the ranges of 5 GHz and 6 GHz for operators of broadband wireless access, providing processing to 100 thousand packets per second that is especially relevant for solving of tasks of transfer of data bulk a set of small packets.

New Snm/Lmn devices are completely compatible to base stations of InfiMAN of 2x2 all models, as well as to the terminal units InfiLINK 2x2 LITE. Terminals are equipped with one or two ports Ethernet. Both ports can be independently configured in L2 mode of switching or IP routing for control of the device or data transmission.

The second Ethernet port has the PoE function of an exit. It is activated programmatically, by means of the corresponding command or via the web interface. The platform is executed in the new body, all Smn/Lmn devices have the built-in LED indication.