| Developers: | Delta Electronics |
| Technology: | UPS - Uninterruptible power supply units |
Content |
Delta - Amplon GAIA-Series - UPS online with double conversion for installation horizontally / vertically.
Scope of application
Delta - Amplon GAIA-Series are recommended for protection of servers, network or telecommunication equipment. In small body (2U) of the UPS are combined: uninterrupted protection and high power factor.
UPSes of the Amplon GAIA series are equipped with the built-in batteries providing continuous power supply of an ultimate load at interruptions in power supply. For increase in time of back power supply there is a connectivity of add-on battery modules.
Features of Amplon GAIA-Series
- Technology of double conversion. 24 hours a day 7 days a week provide security blanket.
- The built-in batteries for nominal battery life.
- Possibility of start from accumulators without the feeding power supply network.
- Management from the computer using special software through RS232 and USB ports.
- The built-in module of line protection of data transmission for the phone / fax / modem / network port.
- Installation horizontally (height 2U) / vertically.
- Connection of add-on battery modules.
- Card slot of SNMP used in crucial applications.
- Programmable control of output sockets for effective energy consumption.
- Broad range of input voltage and regulated current of a charge increase service life of batteries.
- High power factor (KM> 0.97).
- Controlled discharge of batteries - the increased service life.
Specifications
| Model | GAIA-1K / GAIA-2K / GAIA-3K
|
|---|---|
| Power | [GAIA-1K]: 1 kVA / 800 W [GAIA-2K]: 2 kVA / 1600 W [GAIA-3K]: 3 kVA / 2100 W
|
| Input | |
| Rated voltage | 200 / 208 / 220 / 230 / 240 V Lanes of current, 1-phase |
| tension Range | 130 V Lanes of current ~ 275 V Lanes of current (at an overall load) * |
| Frequency | 50 or 60 ± 5 Hz |
| Electrical power factor | > 0.97 |
| Entrance connection | [GAIA-1K]: Equipment cable of a power supply (IEC320 C14) [GAIA-2K]: Equipment cable pitaniyad (IEC320 C20) [GAIA-3K]: Equipment cable of a power supply (IEC320 C20)
|
| Exit | |
| Tension | 200 / 208 / 220 / 230 (by default) / 240 V Lanes of current, 1-phase |
| Total coefficient. tension harmonics | <3% (linear loading) |
| voltage regulation Limits | ± 2% |
| Frequency | 50 Hz / 60 Hz ± 0.05 Hz |
| tension Form | Sine signal |
| Overload capacity | 105% ~ 125%: 3 minutes 125% ~ 150%: 30 seconds > 150%: 1 second
|
| Output connectors | [GAIA-1K]: IEC320 C13 x 3 x 2 [GAIA-2K]: IEC320 C13 x 3 x 2, IEC320 C19 x 1 [GAIA-3K]: IEC320 C13 x 3 x 2, IEC320 C19 x 1
|
| Accumulator and charger | |
| Tension | [GAIA-1K]: 12 V / 8.5 Ach, 2 pieces. [GAIA-2K]: 12 V / 8.5 Ach, 4 pieces [GAIA-3K]: 12 V / 8.5 Ach, 6 pieces.
|
| charge Current | [GAIA-1K]: 0.6 ~ 1.2 A (by default 0.8 A) [2K]: 0.6 ~ 1.2A (by default 0.8 A) [GAIA-3K]: 0.74 ~ 1.38A (by default 1 A)
|
| Battery life | [GAIA-1K]: 12 minutes (at 50% of loading), 4 minutes (at an overall load) [GAIA-2K]: 13 minutes (at 50% of loading), 4 minutes (at an overall load) [GAIA-3K]: 15 minutes (at 50% of loading), 5 minutes (at an overall load
|
| Interfaces | |
| Standard | RS 232 x 1, slot of SNMP x 1, USB x 1 |
| Compliance to standards | |
| Security | CE, EN62040-1 |
| EMS | [GAIA-1K]: EN62040-2 Class B [GAIA-2K]: EN62040-2 Class A [GAIA-3K]: EN62040-2 Class A
|
| Other | |
| Protection of the information line | Built in (RJ11/RJ45, one input / one exit) |
| REPO | RJ11 connector |
| Fastening for rack-mounting | Option |
| the Set for installation vertically | Is included in the delivery |
| Add-on battery module | Option |
| efficiency | |
| Normal mode | > 87% (at an overall load) |
| Environment | |
| Working temperature | 0 ~ 40ºC |
| Relative humidity | 5% ~ 95% (without formation of condensate) |
| Noise level (at distance of 1 m) | [GAIA-1K]: 45 dB(A) [GAIA-2K]: 50 dB(A) [GAIA-3K]: 60 dB(A)
|
| Total characteristics | |
| the UPS Overall dimensions (Highway x In x) | [GAIA-1K]: 440 x 335 x 89 mm [GAIA-2K]: 440 x 432 x 89 mm [GAIA-3K]: 440 x 610 x 89 mm
|
| UPS Weight | [GAIA-1K]: 13 kg [GAIA-2K]: 21 kg [GAIA-3K]: 31 kg
|
| the Battery office Overall dimensions (Highway x In x) | [GAIA-1K]: 440 x 333 x 89 mm [GAIA-2K]: 440 x 430 x 89 mm [GAIA-3K]: 440 x 608 x 89 mm
|
| Battery office Weight | [GAIA-1K]: 16 kg [GAIA-2K]: 29 kg [GAIA-3K]: 43 kg
|
| The site content is translated by machine translation software powered by PROMT. The machine-translated articles are not always perfect and may contain errors in vocabulary, syntax or grammar. Read original article If you find inaccuracies or errors in the results of machine translation, please write to editor@tadviser.ru. We will make every effort to correct them as soon as possible. |