CalAmp Viper-SC

Viper-SC is a line of base stations of Viper-SC 100/200/400/900.

The base station of Viper-SC - permanently mounted 19" the device of new generation of the class SDR (Software defined radio) providing data exchange in a technology radio network on Viper-SC radio modems under the IP protocol at speeds of 4.8-128 Kbps in the channel with slot pitch of radio frequencies 50, 25, 12.5 or 6.25 kHz. The data exchange rate in a radio network can automatically be configured depending on acceptance conditions.

Digital base station of Viper-SC, 2014

The device uses the improved version of the protocol with technology of an exception of collisions of packets of FAMA. For the purpose of capacity growth the data compaction algorithm providing effective compression is used (the maximum proportion 1:10 a.m.). Setup is made via the intuitive web interface.

The base station can be configured for use as the bridge or the router under the Ethernet IEEE 802.3 protocol (the IP protocols ICMP, IGMP, TCP, UDP, IPSec, SNTP are supported) as the DHCP client or the server. IP fragmentation (IP-fragmentation), broadcast of the network addresses (NAT - Network Address Translation), dynamic routing of RIPv2, use of the address resolution protocol is provided (ARP - Address Resolution Protocol).

Advantages

• The protected body with data indication on a front panel.
• Support of transmission modes to individual, groups of subscribers or tsirkulyarno.
• The built-in diagnostics using the Web interface (temperature, tension, signals of RSSI, power of a straight line and backward wave, the number of failures – PER, Packet Error Rate).
• Diagnostic data can be obtained from any radio modem as a part of a radio network under the Telnet protocol.
• Automatic detection of the main and reserve delivery routes of messages.
• Modes of manual and automatic adjustment.
• Use as the router or bridge.
• Work as a repeater ("acceptance-registration-transfer").
• Support of multiple relaying (not less than four relayings).
• Support of relaying on the main and reserve channels.
• The improved capacity.
• Configuration using the web interface and remote loading of the firm ware on a radio channel (an exchange rate of 16 kbps, load time of 20 minutes).
• Automatic optimization of a data exchange rate.
• There is a model of the increased reliability and survivability with duplication of principal components.
• The improved capacity (it is twice more, than at a radio modem of Integra-IP of the previous generation).
• Configuration using the web interface and remote loading of the firm ware on a radio channel (an exchange rate of 16 kbps, load time of 20 minutes).
• Automatic optimization of a data exchange rate in case of use in a radio network with the base station of Viper-SC.

Specifications