ControlCenter-Digital

ControlCenter-Digital is the matrix KVM switch, it is intended for control of computers by number up to 287 through a large number of remote jobs, using the keyboard, the monitor, a mouse and additional peripheral devices.

ControlCenter-Digital represents the building block system consisting of the following components:

• card of an input and output
• the managing card with the built-in central processor of switching
• card of management of switching "logic"
• three standby units of a power supply
• two blocks of fans

ControlCenter-Digital-288 (2014)

Depending on the selected option versions on 288, 160 or 80 dynamic ports are available (options 150 and 80 of ports are in development). Each of ports can be used for connection of the remote user or the computer. The type of the attached device (the receiver or the transmitter) is automatically determined by a system.

ControlCenter-Digital provides connection of receivers and transmitters on CAT cables or optical fiber, allowing to create also mixed systems.

The working system should consist at least from:

• 1 x central module of ControlCenter-Digital with the card of the controller and switching
• 1 x card of an input and output
• 1 x DVI-CPU transmitter
• 1 x DVI-CON receiver

ControlCenter-Digital provides transfer of the following signals:

• keyboard/mouse (USB and PS/2)
• video (DVI Single Link)
• sources of DisplayPort and VGA are possible
• bidirectional Stereo of Audio
• RS232& USB 2.0 transparent transfer

ControlCenter-Digital-288 (2014)

ControlCenter-Digital is compatible to all devices of the DVICenter series. The existing installations can be integrated with the cross-point switch.

ControlCenter-Digital-288

288 ports for any ratio of computers and users Example of use of a system of cascading: 3998 computers can be controlled 50 users.

Specific Features

Modularity

• Completely modular operation mode of the device, with the replaced components
• The device comprises four types of cards: cards of an input and output on CATx or optical fiber for connection of computers or jobs, the card of switching with the built-in central processor and the card of management of switching logic
• Cards of input-output on optical fiber and the twisted pair cable, power supplies, payments of fans turn on systems izamenyatsya without stopping
• The card of switching and the card of management can separately change
• A system can extend, many an element can be replaced or added in the course of system operation

In addition

• Simplicity of connection and system management works at intuition level
• The maximum reliability during the work 24/7
• Error protection, duplication of systems, long term of smooth operation and aggregate term of life of a product

Video

• The extender and the switch make a single system
• HDIP (High Dynamic Image Processing) for ensuring the maximum quality of video is used
• The signal transmission distance on the twisted pair cable up to 140 meters between any two elements of a system, and the general maximum distances of signal transmission will make 560 meters
• Signal transmission on optical fiber will make up to 10 thousand meters

Signals

• Switches bidirectional audio
• Support PS2 and USB keyboard and mouse
• RS-232 and USB 2.0 transparent transfer

Scaling and cascading

• Expansion of a system to 3998 computers with 50 remote jobs of users is possible
• DVICenter can be integrated into a system as "slave"
• Cascading up to 3 levels
• Program expansion for switching is a lot of monitor and many computer systems (TS-Funktion)
• Program expansion for transfer of necessary video to other users of a system and receiving on the screen of video by other users (Push and Get Function)
• Program expansion for management of switching on IP (IP-Control-API)

Dynamic ports

• Any port automatically switches I in a receive mode or transfers
• Any ratio I the number of ports for connection of computers or users

Networks and communication

• Autorecognition and graphic display of all structure of a switching system ControlCenter-Digital
• Two network ports
• Configuring via the web interface
• Centralized operation by updating of a firmware of all logging-in devices
• Text control on TCP/IP, for example, through AMX, Crestron, VSM as KSC-R Commander

use of an external system of authorization through LDAP, the Active Directory, TACACS+, Radius is supported

Security

• Overcoming a problem of the interrupted connection (if the central module ceases to work, perhaps direct connection of receivers and transmitters for further work). The distance in that case will make 140 meters on the twisted pair cable.
• Access control and distribution of user rights (it can be switched off)
• Standby units of a power supply
• CCD Monitoring - defines a status of all elements of a system
• the web interface of a certain device provides information which can be sent (SNMP trap) or is requested (SNMP get).
• The information menu provides full access to settings of the device and parameters of their status

In addition to about other by means of the pivot table the status of devices can be controlled in real time

Monitoring of a system

• Status of a matrix (on/off)
• Status of a switching payment (OK / problem)
• Status of cards of an input and output (OK / problem)
• Status of power supplies (on/off)
• Temperature (°C)
• Networks (yes/no)
• System of cascading (yes/no)
• Speed of fans (RPM)
• Status of payments of a power supply
• Current tension

In addition to the above, data on activity of users can go on syslog and/or on SNMP:

• Input and exit of users in a system
• Unsuccessful attempts of an input of users
• Switching of users between computers
• Unsuccessful attempts of joining of users to certain computers