Adder Red PSU

Adder Red PSU is the device for the centralized remote control a power supply of the scalable systems.

On February 2, 2016 the Adder company provided the management tool a power supply of RED PSU. The device is equipped with 8 or 16 ports with the maximum power on each port up to 20 W.

Adder Red PSU (2016)

The device is mounted in a standard 19-inch rack and provides a possibility of hot swap of power modules, is controlled far off by means of the protected web interface.

Adder Red PSU (2016)

The supply system is intended for connection of Adder switches on 5 and 12 V (the built-in converter of a power supply with 12 on 5 V is optionally available). Conversion input the EXPERT tension in lowered by DC is performed by main units of a power supply with a power of 460 W separately from each other.

One power module is expected 500 thousand working hours that completely satisfies needs of 16 ports. In cases when reservation is required, in the second compartment the add-on module of a power supply can be installed. In case of installation of two power modules loading between them is distributed evenly.

Characteristics

• Input voltage
  • 2 x IEC 90-264VAC 47/63Hz input
  • Efficiency 92%
  • Power Factor 0.99 typical

• Connection of the periphery - 1x 8p8c 10/100 Ethernet
• Ports of a power supply
  • 8 или 16 x locking 3-pin DC connector
  • Voltage output – 12VDC 20W for each port.
  • Each output port supports LPS on IEC 60950-1

• Dimensions
  • Compact strong metal body 1U 19’’
  • 435x44x275 mm
  • 4.5 kg

• Working conditions

• • Temperature: 0 … +50ºC
  • Relative humidity: 5 – 90% without condensate
  • Height above sea level < 2000 м
  • the Guaranteed operating time – 500 thousand hours at an overall load at +50ºC

• Requirements to the browser: Internet Explorer 10 Firefox 11, 24, Chrome 43 or above. Certification of CE, FCC, UL