WatchDog-USB 2.0 is the module of system control

The module of system control of WatchDog-USB 2.0 (WD-U2.0) is intended for continuous control of operation of any computer / server by timely detection of fatal failures in operation of the computer and the operating system with the subsequent automatic restart of the computer. Automatic restart is performed by formation of a pulse signal which influences parallel to the computer RESET button. WatchDog-USB works on USB at the speed of 12 Mbps (Full speed).

WD-U is applied to any RS which require the increased fault tolerance and automatic recovery of working capacity:

• will exclude influence on the computer of network noises and electromagnetic aimings on industrial facilities
• will help with a case of failure of bank payment terminals
• will automatically reboot the "hung-up" server.

Advantages

• Does not occupy the slot in the motherboard, is established in the controlled computer on any empty seat
• Communicates with the computer through the standard USB interface
• Eats from the USB interface and does not require the separate power source
• Supports work of USB 1.1 at a speed of 1.5 Mbps (Low speed)
• Has light indication of a status of WD-U and the controlled computer
• Has high reliability.

Characteristics

• Operating system – Linux OS; Windows 2000/Vista/XP/7; Windows Server 2003/Server 2008
• An interval of the program timer WatchDog – from 0 to 22.27 sec. (one "tic" - 87.36 ms)
• Signal output of RESET of the timer WatchDog - "Sukhoi" contact of the relay
• Operating temperature range – from 5 to 50 °C
• An electric power supply from the USB interface – 5B
• The consumed current – no more than 0.1A
• Relative air humidity at a temperature of 35 °C – from 30 to 80%
• Overall dimensions – 86.4х48.3х20 mm
• Weight – no more than 0.2 kg
• An average term of service – not less than 10 years.

DELIVERY

• WatchDog-USB
• API and the test program on a compact disk
• USB A-B cable
• Bundle of RESET
• Operation manual.