Mitsubishi Electric Intelligent Small Outline Power Module (MISOP)

Intelligent Small Outline Power Module (MISOP) is the intelligent small-size power module for surface mount.

2018: Announcement

On April 25, 2018 the Mitsubishi Electric corporation announced release of the intelligent small-size power module Intelligent Small Outline Power Module (further MISOP) in the body for surface mount which will simplify implementation of the inexpensive invertor systems due to construction, compact, convenient for soldering. It is expected that thanks to convenient location of outputs, the built-in integrated circuit of the driver and circuits of protection the module MISOP will allow to create the invertor systems with the printed mounting circuit board of the smaller size and simpler circuit engineering. Besides, installation on the printed circuit board by reflow soldering of solder will reduce the price and will facilitate assembly in comparison with the products requiring traditional installation through end-to-end openings, the developer noted.

For environment protection and economy of energy invertor systems begin to be installed even in engines of small fans, including in internal and outside blocks of air conditioning systems. The intelligent power module MISOP from Mitsubishi Electric for surface mount is intended for the invertor systems in which use of semiconductor modules with low power consumption is required and also simplicity of assembly is important.

The intelligent power module MISOP for surface mount

Product characteristics:

1. the Simplified construction for the invertor systems
   • Possibility of use of reflow soldering of solder
   • Malaya Square on the printed circuit board

2. Reduction of dimensions and simplicity of construction of the invertor systems
   • Use of thin layer technology of the seventh generation allows to create the chip of the smaller size which is carrying out in the opposite direction IGBT (RC-IGBT) and also increases density of placement of crystals.
   • the Built-in integrated circuits of drivers of management of a lock with functions of protection and the limiter diode with the resistor of restriction of current require less external components
   • development of printed circuit boards with simple circuit engineering and the invertor systems of the smaller sizes at the expense of the optimized pin configuration Is facilitated

3. Functions of protection for additional flexibility of constructions of the invertor systems
   • Protection against overheating and an analog signal for tracking of control temperature of chips.
   • Protection against short circuits using the external shunting resistor and function of protective blocking of inputs of a PWM signal provides flexibility of the choice of security circuits.

In addition, in Mitsubishi Electric company reported that the materials applied to production of this model do not contain mercury and completely meet requirements of Directive 2011/65/EU for restriction of use of dangerous and harmful substances in an electrical and electronic equipment (RoHS).

The module will go on sale on September 1, 2018.