Schneider Electric AP-серия of cards of network management for the UPS

2020: AP9640 UPS Network Management Card 3 и AP9641 UPS Network Management Card 3

The company Schneider Electric announced on March 5, 2020 expansion of a line of cards of network management for uninterruptible power supply units (UPS). Devices will increase security and convenience of control of each separate UPS at the expense of updated processor and firmwares and also still a number of improvements.

Payments of network management of the next generation — AP9640 UPS Network Management Card 3 and AP9641 UPS Network Management Card 3 with function of monitoring of the environment — have higher in comparison with devices of the previous series data transfer rate (to 1 GB / with instead of 100 Mbps) and the increased quantity of the log files which are stored in the preset program that considerably simplifies process of identification of failures and their tracking until complete elimination.

At the first inclusion the user will be able to configure all interfaces necessary for it and also to set the password for login which will protect all network from unauthorized penetration using the LDAP protocol. In total well to four access levels: the administrator, the user of the device, the user with read-only access and the user with access only through network.

Interaction with AP9640 and AP9641 is performed due to their connection to the UPS through a local computer network. The software is completely localized, all devices have a possibility of remote updating of a firmware through the FTP protocol, and for quick search and fault recovery it is possible to use the console via the Micro USB interface or the browser.

Payments of network management send notifications on changes in operation of the UPS in real time that significantly increases the speed of reaction of IT administrators to critical events in a system.

AP9641 UPS Network Management Card 3 at the expense of special sensors provides optional data in the type of information about the environment which will be especially useful in case of the UPS installation in non-standard places without additional resources of control of temperature.

Also there is an opportunity to configure scenarios of operation of the UPS proceeding from features of each specific power network, and thanks to function of remote reset, specialists much more rare will need to leave on remote objects.