COSBY DT-20M

KASBI DT-20M - the digital tachograph with built in GPS/GLONASS modules.

On September 22, 2014 "The Kaluga plant of the cable equipment" provided the KASBI DT-20M digital tachograph.

The tachograph is intended for installation on the vehicles (V) of category M2, M3, N2, N3 and provides automatic control of work-rest schedules of drivers, continuous indication and registration in the automatic mode of a number of parameters of the CU:

• transport motion speed,
• run,
• temporary periods of work and rest of drivers.

Using the digital tachograph it is possible to control location of transport. As record and information storage in tachographs two types of the carrier are used: digital memory of the tachograph and electronic card of the driver.

KASBI DT-20M tachograph

Functionality, features, advantages

• provides registration of motion speed, the passable way, time of management of the CU, the time spent for a workplace and time of other works, time of breaks in work and rest, cases of data access of registration, breaks in power supply lasting more than 100 milliseconds, breaks in pulsing from the motion sensor.

• contains the hardware-software cryptographic (cryptographic) tool (further — the tachograph CIPF block) implementing algorithms of cryptographic information transform and providing registration of information in an unchangeable type in a secure memory, conversion of signals of GLONASS to data on the current time and about vehicle fix-up values in an unchangeable type.

• has the certificate of conformity to the technical regulation about safety of wheel vehicles (the order of the Government of the Russian Federation of 9/10/2009 No. 720), with the changes accepted by the order of the Government of the Russian Federation of 9/10/2010 No. 706, No. S-RU.AG75.V.22509.

• it can be used on vehicles for transportation of dangerous loads of the class EX/II, EX/III, AT, FL, OX according to classification of DOPOG (a hazard class 1ExnIIAT5U).

The KASBI DT-20M tachograph prepares the reporting in printed form:

• events and faults from the card and from the control device
• Technical data
• speeding
• graphic report on operation modes, motion speed and passable way

KASBI DT-20M will provide:

• Increase in traffic safety of the vehicle due to control of work-rest schedules of the driver
• Cutting of costs for fuel and lubricants not less than for 15% due to observance of the high-speed mode of the movement CU
• Optimization of routes of transportations and schedules based on contrastive analysis of tachograms
• Accumulation and data storage in 366 days
• Indication and preserving in memory of the device of data on speed, vehicle mileage, operation modes of drivers
• Registration and storage of different data
• data of cards of the driver and workshop
• the warnings and faults connected with the control device and operation of cards
• data on the vehicle, data of the odometer, detailed data on speed
• interventions in the control device (cases of data access of registration, breaks in power supply lasting more than 100 milliseconds, breaks in pulsing from motion sensors)