Developers: | Powercom (Powerkom-service) |
Last Release Date: | 2019/07/08 |
Technology: | UPS - Uninterruptible power supply units |
Content |
Powercom of RPT — a series linearly - interactive uninterruptible power supply units UPS Raptor.
2019
RPT 600-1000AP Euro with three euro sockets
On July 8, 2019 the POWERCOM company announced updating of the product line of uninterruptible power supply units like line-interactive – RAPTOR. Within this series the producer put on the market the RPT 600-1000AP EURO model equipped with three euro sockets.
Uninterruptible power supply units of RPT 600-1000AP EURO are issued in capacities – 600 BA, 800 BA, 1000 BA. The power conditioner (AVR) which is built in them supports voltage output within regulation, without using an accumulator resource at fluctuation of tension of the power supply network. It should be noted that RAPTOR UPSes with the index of AP can provide protection of a telephone, modem and network line against impulse interference and also contain the communication port USB for contact with the computer that allows to complete timely system operation with preserving of data. The provided model has demanded characteristics, at the same time there are in an available price segment, as well as other models of this series.
Main characteristics of the RPT-600AP EURO/RPT-800AP EURO/RPT-1000AP EURO UPS:
- 3 Schuko output connectors with battery support;
- linearly - interactive technology with voltage output in the form of the approximated sinusoid;
- automatic AVR voltage controller;
- microprocessor control;
- function of saving of energy Green Mode;
- function of cold start;
- short circuit protection and overloads at the exit;
- automatic accumulator charging in the switched-off status; · the communication port USB with support of the Smart Battery standard.
Raptor 1025/1500/2000 LCD
The Powercom company announced on March 11, 2019 emergence in a series of uninterruptible power supply units like line-interactive of the RAPTOR model with the LCD display.
According to the producer, the model is intended for protection of personal computers together with the monitor, network switches, modems and other computing and telecommunication equipment from the main malfunctions with power supply: overload or short circuit; lowerings, increases and total disappearance of tension in the power supply network.
According to the statement of the producer, the RAPTOR series UPS with LCD provide reliable protection of the equipment and at the same time remain in an available price segment. The key difference of model is the LCD display displaying UPS operation modes, a charge of the accumulator both voltage output, and the removable cord allowing to move safely the device.
The model is provided in three capacities – 1025 BA, 1500 BA, 2000 BA. The RAPTOR 1025/1500/2000 LCD UPS allows to connect up to 4 devices at the same time via Schuko connectors. The built-in power conditioner (AVR) supports voltage output within regulation, without using an accumulator resource at fluctuation of tension of the power supply network. The communication port USB for contact with the computer will allow to complete timely system operation with preserving of data, claim in Powercom.
Main characteristics mentioned by the producer:
- 4 Schuko output connectors with battery support
- Linearly - interactive technology with voltage output in the form of the approximated sinusoid
- LCD display
- Automatic AVR voltage controller (Auto Voltage Regulation)
- Microprocessor control
- Function of saving of energy Green Mode
- Function of cold start (turning on of the UPS in lack of tension of the power supply network)
- Short circuit protection and overloads at the exit
- Automatic accumulator charging in the switched-off status
- Removable cord
2016: RPT-600A, RPT-800A, RPT-1000A
Devices of a series of Powercom of RPT are intended for protection of personal computers and network equipment against failures of power supply:
- overloads, short circuit;
- lowerings, increases, total disappearance of tension in the power supply network.
The systems of the Raptor series are equipped with the built-in power conditioner and support voltage output within regulation at constantly lowered power supply network tension, without using an accumulator resource. For convenience of connection of the equipment three output connectors with battery support are provided in the UPS.
As a part of a series of model of devices:
- RPT-600A,
- RPT-800A,
- RPT-1000A
Degree of protection
- Protection against an overload and short circuit – automatic switching off for protection of electronic circuits
- The increased power supply network tension – the lowering transformer winding of AVR (auto voltage regulation)
- The lowered power supply network tension – overwinding of the AVR transformer (auto voltage regulation)
- Loss of tension – work from the internal rechargeable battery
Specific Features
- Z the output connector with battery support
- Linearly - interactive technology with voltage output in the form of the approximated sinusoid
- Automatic AVR voltage controller (Auto Voltage Regulation)
- Microprocessor control
- Function of saving of energy Green Mode
- Function of cold start (turning on of the UPS in lack of tension of the power supply network)
- Short circuit protection and overloads at the exit
- Automatic accumulator charging in the switched-off status
- LED indication
Model |
RPT-600A |
RPT-800A |
RPT-1000A |
|
Technology |
UPS type |
Linearly - interactive |
||
Execution |
Form factor |
Floor |
||
Input parameters |
Power |
600 BA / 360 W |
800 BA / 480 W |
1000 BA / 600 W |
Input voltage |
220/230/240 IN (160 ~ 275 C) |
|||
Current frequency |
50 Hz or 60 Hz ± 10% (auto detection) |
|||
Output parameters |
Voltage output |
220/230/240 V ± 5% |
||
Tension form |
Step approximation of a sinusoid |
|||
Current frequency |
50 Hz or 60 Hz ± 1% |
|||
Automatic voltage control (AVR) |
Automatic stabilizer of tension
|
|||
Switching time |
From 2 to 4 ms including time of determination (standard) |
|||
Protection of the UPS and equipment |
Protection of the UPS against overloads |
Auto disconnect of the UPS at an overload of 110% of rated power within 60 seconds and 130% within 3 seconds |
||
UPS input |
Automatic switching off for protection
|
|||
Short circuit |
Immediate disconnection of the UPS from the equipment |
|||
Protection of phone, fax, modem, local network |
no |
|||
Rechargeable battery |
Type |
Hermetic unattended lead-acid.
|
||
Tension and battery capacity |
12B 7.2ach |
12B 7.2ach |
12B 9ach |
|
Standard time of a recharge |
3 ~ 4 hours |
|||
Time of battery support (operation of the PC with 17" the monitor, load of 100 W *) |
|
|
||
Холодный старт | turning on of the UPS in lack of tension of the power supply network | |||
Защита АКБ | Автоматическое самотестирование и protection against deep discharge |
|||
Ports and interfaces |
no |
|||
Physical parameters |
Output connectors |
3 x IEC320 C13 or 3 x EURO with back supply |
||
Sizes (Highway*G*V), mm |
100 x 278 x 140 |
|||
Net weight, kg |
4.2 |
4.4 |
4.5 |
|
Gross weight, kg |
4.6 |
4.77 |
4.9 |
|
Indication |
LED |
|||
Sound signaling |
In an operation mode from the battery - the repeating sound signal each 2 seconds within the first 15 seconds, further two times a minute; Low charge batteries - the repeating sound signal two times per second; The Overload - a long sound signal. |
|||
Environment parameters |
Acoustic noise |
< 40 Дб (на расстоянии 1 метр от поверхности) |
||
Working conditions |
The humidity 0 ~ 95% without condensation, admissible temperature 0 ~ 40os, height is no more than 2000 meters above sea level |
|||
Guarantee |
Standard guarantee |
2 years |