TouchPlat K-серия Information booths

TouchPlat K-серия is a line of information booths.

2017

Release of Smart Wall K-50

On September 1, 2017 the TouchPlat company announced release of the information booth of the K-50 Smart Wall model.

The information booth of Smart Wall is intended for the solution of non-standard tasks. The terminal differs in a possibility of customization according to project requirements.

Information booth of Smart Wall K-50, (2017)

Front and back part of the booth — the tempered glass 8 mm thick behind which touch Full-HD monitors are located (one or two, depending on a complete set).

The basic complete set of the booth contains the touch monitor and the managing computer on the basis of the Intel processor i3. The construct of the body allows placement of the additional hardware:

• uninterruptible power supply unit
• readers of proximity cards
• USB ports for charging of phones and tablets
• 3G/LTE-modem
• the router for distribution of the Internet
• The USB video camera for background analytics
• check printer

By means of installation of the second monitor on the back panel the booth becomes the full-fledged two-sided information terminal. This technological solution is focused on the round-the-clock operation. If necessary use of monitors of higher resolution is possible.

The product is focused on advertizing projects, navigation, use as the directory of goods and services. Using the built-in video camera broadcast of content for target audience with breakdown by a floor and/or age is possible.

General information

• Body type — floor, structural steel of 2-8 mm
• Material of front surfaces — the tempered glass of 8 mm
• Temperature condition — 0.40 °C
• The touch monitor - 32 ″-49 ″ 1920х1080
• The touchpad with support of multi-touch (multi-touch)
• Managing computer
  • Intel processor i3/i5
  • RAM of 4096 MB
  • Hard drive of 500 GB
  • Support of Intel vPro technology

• Parameters of network
  • EXPERT 110B/220B, low energy consumption

• Communication
• * Ethernet
• * Wi-Fi
• Software
• * Windows 10 IoT Enterprise
  • Hardware drivers

The information booth of K-10 is created

On August 25, 2017 the TouchPlat company announced development of the information booth of K-10.

The intelligent touch terminal is positioned as a compact model of the information booth with a possibility of placement in small premises.

Information booth of K-10, (2017)

K-10 - the niche solution for collecting of analytical information on audience and demonstration of advertizing with a possibility of demonstration of certain content to the set groups of people.

The device in the metal anti-vandal body 5 cm thick. The NUC Intel mini-PC of 10 x 10 cm in size, thickness less than 3 cm Processor Intel Core i3 in a basic configuration (processors from Atom to i5 are available) operates as the managing computer processes the video and data collected from the built-in camera of high resolution. Special software analyzes information, selects advertizing or information content and displays the image of quality Full HD on the interactive monitor.

Completing of booths processors from Atom to Core i5, equipment by monitors with a diagonal of 15.6 or 19.5 inches, installation of video cameras for collecting of analytics, scanners of barcodes, readers of biometric data, podderzhkf technologies of remote access and protection of Intel vPro is possible.

In the booth of K-10 only industrial components allowing it to work uninterruptedly in the mode 24 x 7 are used.

Specifications

Available several options of a basic complete set of the booth.

In booths of K-10 touchpads of two types are used:

• infrared — in model 19.5 ″ (1440 x 900)
• projective and capacity (PCAP) — in other models.

Projective and capacity touchpads support up to ten simultaneous contacts (multi-touch), infrared — to four.

All modifications of terminals are equipped Ethernet- controllers for connection to network. Installation of modules is optionally available Wi-Fi and Bluetooth.

For analytics the built-in cameras without autofocusing are used (for minimization of errors at determination of audience).

For models with screen 19.5 diagonal ″ the possibility of installation of the scanner of one-dimensional and two-dimensional barcodes, the biometric fingerprint scanner is provided. Any booth in a line can be equipped with the system of passive cooling.

Booths work running OS of the version of Windows 10 IoT Enterprise.

Options of installation of the booth:

• wall fastening - 15.6 ″/19.5 ″
• floor fastening - only 15.6 ″
• desktop fastening - only 15.6 ″

For wall mounting fastening of VESA 200×100 is used.

For August 25, 2017 to delivery two options of brackets — with adjustment of an inclination of the booth by the user, and an opportunity to set the fixed slope angle at initial equipment installation on site of operation are available.

In retail the information booth of K-10 the price-chekera, the directory terminal, the device for demonstration of Digital Signage can perform at the same time functions. At the enterprises of fast food, the terminal can serve in coffee shops and restaurants to interactive menus.