Hospitaltechnik equipped the Medsi multifunctional medical center on Michurinsky Prospekt

2021: Equipping the center with clean room modules and network management systems

December 16, 2021 it became known that the presentation of the multifunctional medical center MEDSI on Michurinsky Prospekt took place.

Medical center on Michurinsky Prospekt

As reported, the center was visited by Chairman of the Federation Council RFValentina Matvienko, Moscow Mayor Sergei Sobyanin, Chairman of the Board of Directors of AFK Sistema Vladimir Yevtushenkov.

As part of the meeting, the guests were presented with a high-tech surgery center for 8 operating rooms, which Hospitaltechnik equipped with clean room modules.

The medical center, which has become one of the largest projects of the MEDSI Group of Companies, is an eight-story building with an area of ​ ​ 33.4 thousand square meters.

The medical complex included a clinical and diagnostic center for children and adults, a day hospital, a 24-hour hospital with a center for high-tech surgery.

The clean premises in the center were created by Hospitaltechnik using the solutions of the German manufacturer HT Group and the domestic manufacturer ENVE Group.

The total area of ​ ​ clean rooms equipped with Hospitaltechnik - corridors, intensive care rooms, preoperative and 8 operating rooms - amounted to more than 2000 sq.m.

The "clean" rooms of the multifunctional medical center include a variety of large-format wall and ceiling panels, automatic doors, laminar ceilings, embedded monitors and cabinets for storing consumables.

Most of the modules of clean rooms medical in the multifunctional center of MEDSI on Michurinsky Prospekt are from the domestic manufacturer ENVE. This the Russian trade brand with its own production St. Petersburg in includes all elements of modules of clean rooms: wall and ceiling systems, various types of doors, windows, as well as surgical washes, lockers, etc.

8 operating centers are also equipped with engineering network management systems of the Russian manufacturer - Medical Imaging Systems - and are part of the Smart Operating MVS solution.

The MVS solution implemented in MHC MEDSI allows you to centrally control temperature and humidity, medical gases, turn on and off the light, open and close doors using the touch panel built into the wall.

As part of the MEDSI MMC on Michurinsky Prospekt:

• 4th floor:
  • Operating general surgery, urology, traumatology and orthopaedics 45.52 sq.m.
  • Operating LOR and NLC area of 36.15 sq.m.
  • Intensive care ward (isolation unit) with an area of 24.14 m2,
  • 6-bed intensive care unit with nurse's post (including 1 cardiology bed) with an area of 86.43 m2,
  • Prestroke/awakening chamber for 3 beds with an area of 44.86 m2,

• 5th floor:
  • intensive care ward for three beds with a total area of 58 m2.

• 7th floor:
  • integrated operating room for general surgery with an area of 42.34 sq.m.;
  • generic integrated operating room for gynaecology and urology with an area of 36 sq.m.

  42 sq.m. orthopedic-trauma operating area;

  • General operating room for PID and proctology with an area of 41.97 sq.m.
  • Hybrid Operating Room for Cardiovascular Surgery with 66 sqm Philips Angiograph
  • hybrid operating room for neurosurgery with an area of 68.43 sq.m.

• 7 single intensive care wards of about 13 sq.m. each;
• Isolation-ward intensive care and intensive care unit for 1 bed (septic) area of 25 sq.m.;
  • Awakening chambers for 1 and 5 beds of 22.5 and 86.15 m respectively;

Peculiarities of the project:

• Creating a suspended ceiling system for an angiograph: Hospitaltechnik specialists designed and mounted a suspended ceiling system for the Flexmove FD20 C-arc, which weighs 2 tons. The system of fastening of the S-arch FlexMove allows to move it in the range of 4.4х2.6 m. Special ceiling guides allow to set a system with the option FlexMove to non-working position during the combined operations and endovascular procedures. This allows you to free up enough space around the table in the hybrid operating room. Another feature of the FlexMove technology is that it allowed the installation of a laminar air flow system (LAF): wide ceiling guides leave enough room for the installation of a laminar flow unit (3 x 3 m). When the X-ray system with the FlexMove option is not used, it can be removed from the sterile airflow area.
• 350 sq.m. glazing in intensive care wards - Smart windows and windows with built-in blinds are used as facade and viewing inter-room windows.
• Current-conducting French homogeneous linoleum is used as floor material on the object.
• Stylish wall panels with backlit and dimmed prints in the operating rooms. Prints designed exclusively for the center use life-affirming illustrations to create an emotionally positive atmosphere.
• Turnkey engineering networks: a team of Hospitaltechnik specialists developed projects for engineering networks of clean rooms and implemented them turnkey (medical gases, ventilation, water supply and sewerage, power supply, all low-current networks).