1C:Enterprise 8. Management of iron and steel works

"1C:Enterprise 8. Management of iron and steel works" is intended for automation of the enterprises of ferrous and nonferrous metallurgy.

Existence at the enterprise of a modern ERP system is one of necessary conditions of creation of a common information space for planning and production management. The ERP system considering industry specifics becomes important competitive advantage, helps to reduce the total costs, increases efficiency of business, increases investment attractiveness of the company.

For work with a configuration "Module 1C: Management of iron and steel works" is necessary to have the set 1C:Enterprise 8.3 platform for 1C:ERP (not below version 8.3.7). Use of a configuration "Module 1C: Management of iron and steel works for 1C:ERP" is possible only at integration into the solutions containing the 1C: ERP Enterprise Management 2 configuration.

The software product is protected and contains the code fragments which are not subject to change by the user, has protection against unauthorized use. At the same time the principle of the maximum openness of the code for a possibility of adaptation of a product under needs of end users is implemented.

"Module 1C: Management of iron and steel works for 1C:ERP" it is developed using functionality of 1C:Subsystems Library 8.3.

"1C: Management of iron and steel works" allows:

• Plan supply of metallurgical production
• Keep the cost accounting of metallurgical production
• Make accounting of repairs and hardware maintenance of the metallurgical enterprise
• Automate process of receipt and accounting of scrap
• Plan loading and manage work of metallurgical laboratory
• Keep account of data on metal swimming trunks
• Keep account of recoverability of defects, analyze the reasons of its emergence
• Keep account of cutting of materials, create cutting charts
• Carry out the accounting of shipment and product sales
• Make calculation of profitability of orders and contracts
• Calculate cost values of finished goods
• Make payroll
• Prepare the necessary regulated and industry reporting
• Also, there was available a management of work of factory laboratories, determination of product quality at production phases, accounting of different data, management of carrying out mechanical and metallographic tests, control of maximum permissible values and the analysis of results of tests.
• Consider metal swimming trunks, flow calculation of the electric power on melting and on ton of good metal, control of a consumption of expensive materials and ferroalloys, the analysis of measured and unmeasured products, adjustable and unrecoverable defects, formation of balance of metal of the enterprise, formation of electronic passports of swimming trunks, passports of pouring, marking and control of the movement of products.
• Manage loading of transport on volume and weight characteristics, control accomplishment of conditions of deliveries under contracts, create sets of the industry shipping and accompanying documentation.

2017: Release of 1C: Management of iron and steel works 2

On August 10, 2017 the AVK-system company announced release of industry solution "1C: Management of iron and steel works 2. The module for 1C:ERP".

1C:Enterprise 8. Management of iron and steel works - the presentation (2017)

Functionality

• Accounting and control of intake of scrap metal and auxiliary materials;
• Accounting of swimming trunks of metal, pouring;
• Management of work of laboratories, technical inspection department;
• Accounting and control of transactions of production of rolling, wear of the equipment, roll economy;
• Automatic formation of the industry accompanying documentation on finished goods;
• Operational calculation of blendings;
• Casting defects accounting;
• Accounting of molding and production of rods;
• Accounting in workshops of heat treatment (formation a cage, the material consumption, an equipment resource, pechevy cards, accounting and control of the modes of heat treatment).

Includes:

• Configuration distribution kit;
• Function model of a configuration;
• Documentation kit on a configuration;
• Activation envelope of the 1C:ITS Industry Preferential;
• PIN code of program protection of a configuration on one workplace;
• Licenses to use of a configuration on one workplace;
• PIN codes for registration on the user support website.

Configuration "1C: Management of iron and steel works 2. The module for 1C:ERP" is protected and contains the code fragments which are not subject to change by the user. At the same time the principle of the maximum openness of the code for a possibility of adaptation of a product under needs of end users is implemented.

Expansion of quantity of the automated jobs is performed by acquisition of client licenses for the 1C:Enterprise 8 platform (on 1, 5, 10, 20, 50, 100, 300, 500, 1000 jobs) and client licenses "1C: Management of iron and steel works 2" (on 1, 5, 10, 20, 50, 100 and 300 jobs).

Client licenses "1C: Management of iron and steel works 2" are intended for licensing of workplaces in which industry functionality of a configuration will be used.