AeroCool Advanced Technologies: DS Cube

The AeroCool Advanced Technologies (AAT) company, one of producers of the body, power supplies, accessories and peripheries for computers, provided the DS Cube body in October, 2013. The new products available in several flowers are intended for assembly of fast and silent high-performance game systems.

The game computer is not obliged to be at all huge shining tower, to rustle with tens of fans and to threaten impressionable guests with acute aggressive angles. Things are changing, energy consumption and heat release of powerful configurations is stabilized — now a productive system can be collected in the compact body, such as technological AeroCool DS Cube.

The body is made of 0.8-mm steel of SGCC, front and upper covers are covered with nice on the touch material under skin. Construction is thought over up to trifles — on all perimeter of DS Cube miniature openings for ventilation are scattered. If desired the cover of the body can be replaced with a special grid which increases an air intake. All controls and additional interfaces are taken out on a top panel: there are two USB 3.0 and two USB 2.0, ports of audio and the indicator of operation of the hard drive.

The internal compartment DS Cube contains motherboards of the Micro-ATX and Mini-ITX formats, at the same time payments are mounted horizontally not to create additional load of the heavy installed components. Construction provides installation of the longest modern video cards (to 320 mm provided that the basket for the 3.5-inch external device will be dismantled) and massive processor coolers. The compartment for the power supply equipped with rubber pads and the dust filter is located in the lower part of the body. The producer recommends to set BP no more than 160 mm long. Besides, the body allows to install two 2.5-or 3.5-inch hard drives in universal connectors with convenient skids.

The ventilation system of DS Cube is not limited to cuts and dust filters. For a fence of a cold air on the front panel of the body the 20-millimeter fan with the rotational speed of blades of 500 revolutions per minute is installed. The back panel is equipped with the 12-millimeter fan. All fastenings are universal and support fans of the different sizes. The openings which are cut through in walls allow to lay bells of the water cooling system quickly. If desired a system with a radiator can be installed directly in the system unit thanks to numerous fastenings.