Equicom Monitoring of sensors in server on SNMP

Monitoring of sensors in server on SNMP.[1]

The solution for remote monitoring of the environment using sensors on SNMP (the device of monitoring Equicom PING3-knock) allows to organize constant control of different indicators: temperatures, humidity, presence of tension, leakage of water and existence of smoke indoors. Can exercise control of functioning of communication channels and automatically reboot the equipment at communication loss. The Equicom device has dimensions 89 x 62 31 mm and weight only 110 gr. that allows to place it practically in any place. 

Why you use the SNMP protocol for monitoring of sensors? 

We selected the SNMP protocol since it is the widespread protocol which tasks include control of network devices and obtaining information on their work, in particular. As a rule, all modern managed network devices  have a so-called Management information base  (MIB). You can integrate Equicom devices with any program for monitoring. Through SNMP it is possible to integrate with the managing systems, such as Zabbix , Nagios, MRTG, Cacti , PRTG Network Monitor, Tivoli, HP OpenView, Wratsup, Big Brother, Castle Rock, OpenNMS, etc.

kaky sensors are included in the package "Monitoring of sensors in server on SNMP"?

The solution for monitoring of sensors in server on SNMP, consists of the main sensors:

• temperature sensor (2 pieces).

• sensor of existence 220B.

• sensor of existence of smoke.

• water leakage sensor.

• sensor of opening / closing.

• the shock sensor (which is built in - an additional option).

• the power supply for the Equicom device.

What main opportunities of sensors?

Temperature sensor.

This cheap analog temperature sensor can control temperature from -40 °C to +125 °C about the accuracy of 2 °C. Ideally to detect problems the connected with temperature in premises with computers, such as air conditioning, sudden temperature jumps, overheating in server racks. The temperature sensor continuously reads out values and betrays them to the device for monitoring (SNMP). It is connected to special AN1 and AN2 connectors.

In a set: 2 temperature sensors;

Sensor of existence 220B.

Joins before the uninterruptible power supply unit (UPSU). It can detect and announce (SNMP a ladder )  availability and power losses of the main accumulators. If you usually face voltage drops and if you want to be warned before your UPS is switched-off, then this sensor will help you. It is connected to the EXT connector.

Sensor of existence of smoke.

The sensor allows to control far off emergence of smoke in any point of a controlled object. The sensor is connected to any analog output of a monitoring system of Equicom. At the time of emergency, smoke gets on electrodes of the sensor and the signal on the Equicom device is given, and it will already notify you (e-mail, snmp, the SMS).  it is possible to configure a siren on a case of operation of the sensor.

Water leakage sensor.

The sensor of a leakage of water is intended for detection of the fact of emergence of water in the protected zone. Just connect the sensor to any analog output of a monitoring system and competently mount in server, in the place most veroztnogo floodings.  at the time of emergency, water gets on electrodes of the sensor and the signal on the Equicom device is given, and it already notifies you. 

Sensor of opening / closing.

The wire sensor of opening of a door (sealed-contact) is the magnetocontact annunciator intended for blocking of door and window openings and also other structural elements of buildings and constructions.  It is connected to any idle line of the Equicom device and does not require in addition a power supply.

 What scopes of this solution for monitoring of sensors on SNMP?

Small premises with computers, server premises, server racks, different cabinets for servers and telecommunication equipment, utility rooms and small warehouses, etc.