FLIR i3

The thermal imaging camera for an energy audit of the buildings and measurements connected with elektriky - for the first time at the price less than 1500 US dollars

The thermal imaging camera (About thermovision) can be necessary if you actively are engaged in construction, diagnostic testings of enclosing structures, are an inspector on supervision of the construction exercising control and repair of the OVKV systems or it is only necessary for you, to examine the dwelling before carrying out repair work. If you are representatives of the large industrial company, the professional electrician or you need to check quality of a house electrical wiring only?

Opportunities for contactless temperature measurement

The FLIR i3 thermal imager provides the thermovision image with a resolution of 60Х60 pixels. Image quality impresses users who use the thermal imaging camera for the first time. The device is capable to display even the minimum temperature changes in 0.15 ° C.

By means of the exposure meter in the center of the IK-image it is possible to receive exact temperature values of the studied object.

The pyrometer determines surface temperature only in one point, and the FLIR i3 thermal imager – creates the IK-image of the studied object, data on temperature can be obtained in each pixel of the image. Thus, one FLIR i3 thermal imager replaces 3600 pyrometers.

When using a pyrometer it is easy to lose sight of a critical problem. The FLIR i3 thermal imaging camera scans all components of the equipment that allows to analyze instantly an object entirely, determining all range of possible problems.

FLIR i3 thermal imager: the simple device in application helping to prevent breakdowns and short circuits. Usually before failure electric equipment overheats, as well as in case of bad connection of components of a chain. Use of the FLIR i3 thermal imaging camera gives the chance to quickly check work of an electric unit for existence of problems. Thus, you can avoid the accidents and the fires caused by violations in operation of electric equipment.

The FLIR i3 thermal imager saves the received images on the removable SD card in the JPEG format. The IK-image contains all data of temperature measurements, and in further work you can receive temperature in any point of the image. The software of FLIR QuickReport using which it is possible to prepare quickly the report on results of diagnostic check is included in the package and to make the analysis of thermovision images. The thermal imaging camera is compatible also to FLIR Reporter software package having ampler opportunities.