QTECH QPLA Line of PLC adapters

QPLA is a line ^[1].

QTECH PLC adapters work on technology of HomePlug of AV and help to organize a local network with a speed of 200 Mbps or to be connected to the Internet via any electric socket in the house. An optimal solution for apartments, private houses and offices where laying of new cables is undesirable or impossible for some reason.

All devices of a line are equipped with Clear Path technology. Using Clear Path technology, it is possible to create network when PLC devices are connected to different phases, i.e. the technology dynamically selects less noisy channels for information transfer, it increasing data transfer rate.

QPLA-200 v.2

PowerLine the QTECH QPLA-200 v.2 adapter is applied on the existing power supply network of the house or office, allowing not to lay additional Ethernet cables, and serves for expansion of your network. Having connected the adapter in the socket, the user receives ready network with a speed up to 200 Mbps which allows to watch stream video of the high definition (IPTV), and also to use Internet service in full.

QPLA-200 v.2 adapter, 2014

If during certain time the adapter does not transfer and does not accept data, QPLA-200 v.2 passes into the mode of the lowered energy consumption (up to 50% of economy of energy).

QPLA-200 v.2P

PowerLine the QPLA-200 v.2P adapter – can be used for expansion of network. Use of adapters in home or office network allow to create steady connection among themselves of network devices, being on removal from each other, without the need for laying of additional Ethernet of a cable. Providing the speed of acceptance/data transmission to 200 Mbps, QPLA-200v.2P adapters an easy way allow to connect home computers to the Internet and to provide transmission quality of the telecom operators given for different services (including HD IPTV).

QPLA-200 v.2P, 2014

QPLA-200v.2P has the built-in socket that allows connection of other devices. At the same time the adapter filters noises from the attached device which can interfere with its work.

QPLA-500WP

The set of QPLA-500WP adapters, consists of QPLA-500p and QPLA-500W.

The QPLA-500p adapter is the compact PLC device of "type through passage" with low power consumption which is intended for the organization of data exchange through network of power supply ~ 220 V.

QPLA-500WP, 2014

The adapter of type "through passage" has three physical interfaces. In addition to a fork for network of power supply ~ 220 V and the RJ-45 connector, the socket of an electric power supply ~ 220B is built in it. Such construct is convenient that it releases network for inclusion of other consumers of the electric power and network extenders.

QPLA-500W PLC with support of Wi-fi (2.4 GHz) is the compact device with low power consumption intended for the organization of data exchange through network of power supply ~ 220B, Existence in the Wi-fi device allows to exclude completely use of wires in the house and to achieve the maximum mobility.

Notes