SmartOnline SU60KX

SmartOnline SU60KX is the modular 3-phase UPS of the SmartOnline series with a power of 60 kVA, UPS online with double conversion.

Advantages

60000 VA 3-phase UPS (60 kVA) of vertical type.

• The modular architecture of ensuring reliability of N+1 helps to achieve 100% of readiness of a system
• Parallel inclusion according to scheme 1+1 for reliability augmentation of a system or increase in power is allowed
• Low total values of non-linear distortions reduce cost of installation due to use of the generator with a ratio 1:1 to loading
• 3-phase wire connection of an input and exit (220/380 V, 230/400 V or 240/415 V, 3 phases, 4 wires + earth, connection by a star)
• Technology of the IGBT conversion and zero switching time, online the mode with double conversion
• Operating time can be prolonged due to adding of modules of external batteries

Description

The SU60KX model (60 kVA) of Tripp Lite company - the 3-phase intellectual online system of a line Tripp Lite SmartOnline of modular construction. It provides to 100% system availability due to use of modular architecture of N+1 and a possibility of parallel inclusion according to scheme 1+1. In the N+1 SU60KX UPS configuration provides three complete, reliable power 20 kVA modules which can be replaced without switching off of the UPS (a power supply of loading remains) in need of carrying out service. In a configuration 1+1 two SU60KX UPSes connected in parallel can provide fault-free reliability (two 60 kVA UPSes feed load of 60 kVA) or the increased power (two 60 kVA UPSes feed load of 120 kVA).

Main Characteristics

• N+1 configuration: if carrying out service is required, it is possible to replace any of three complete, reliable power modules of 20 kVA without power off of loading
• Configuration 1+1: Two SU60KX UPSes can be connected in parallel to ensure or trouble-free and reliable operation of the equipment, or to increase power on a power supply
• The big electrical power factor, the improved technology of the IGBT conversion and technology of digital signal processing (DSP) provide low total nonlinear distortion coefficient (THDi).
• Low total values of non-linear distortions (less than 3%) reduce cost of installation due to use of the generator with a ratio 1:1 to loading
• Exclusively effective work (up to 97%) allows to save means due to decrease in electricity consumption.
• Interactive work, double conversion using IGBT technology provide the alternating voltage of the correct sinusoidal form at the exit
• Continuous work with instant switching at power supply failures, fluctuations of tension and impulse interference in network is supported
• Non-linear distortions, electrical impulse interference, fluctuations of frequency and other difficult solved problems with power supply are eliminated
• Power output is 60000 BA/48000 VT, 3-phase wire connections of an input and exit
• Adjustment of tension with the broad range: 173 – 300 V/276-477 V ~.
• Add-on units of batteries (BP480V26B and BP480V40C model) are located in the separate external battery compartments having independent connection (are necessary for work in the UPS mode / back battery power supply; are purchased separately)
• Operating time from batteries can be prolonged due to connection of add-on external units of batteries (the BP480V26B and BP480V40C models; service life of batteries up to 7 years, are purchased separately)
• On the front panel there is a set of LEDs and the LDC display to which the screen with the event log can be brought, registered in real time. Capacity of the magazine is up to 500 events.
• The screen of dynamic control of the battery optimizes operation of the battery for prolongation of its service life and allows to execute cold start of the UPS
• The built-in port of communication RS-232 works with PowerAlert software for issue of a command of switching off and record of the report for one server
• The connector of connection of accessories can be used for installation of the card (SNMPWEBCARD model) with management through SNMP for remote switching off, reset and other functions
• The button of abnormal switching off (EPO function) switches off the UPS and disconnects a bypass chain
• The built-in interface with dry contacts for the EPO function supports remote emergency shutdown in the conditions of large objects