Smartec of the ST-PR070MF, ST-PR170MF and ST-PR170MK ACS model

The range of the reader devices Smartec for the organization one - and two-factor access restriction to premises/buildings was filled up with spring of 2015 of the ST-PR070MF, ST-PR170MF and ST-PR170MK model which perform contactless identification of users according to RFID cards of the Mifare standard. All new products will recognize the code of cards at distances from 5 to 10 cm, and Mifare the reader ST-PR170MK is equipped with the dial keyboard and supports identification on a PIN code. It is important to note that all new readers have the high-strength plastic body with IP65 and can function as inside, and out of premises at temperatures up to -30 °C.

High resistance of new products of Smartec to cracking is provided due to use of the Mifare standard which is besides, one of the most widespread in the world. For acceptance of the code of cards each reader Mifare implements technology of radio frequency identification of RFID (Radio Frequency Identification) and works at frequency of 13.56 MHz. At the same time the range of identification of new products is from 5 to 10 cm thanks to what each reader of a series optimum is suitable for operation in control systems of access of office buildings, warehouses, service premises of shops, and also for a personnel time recording.

A new series of reader devices of the Mifare standard includes one model with the dial keyboard and two without it. At the same time the keyboardless ST-PR070MF and ST-PR170MF models are intended for one-factor identification as execute only acceptance of the code of the map admission brought to them, and Mifare the reader ST-PR170MK with the dial keyboard provides two-factor identification as along with contactless acceptance of the code of cards, this reader performs identification of users on a PIN code that considerably complicates pass according to someone else's admission and increases security of an object in general.

It is important to note that the reader with the 12-button dial keyboard supports several options of the different modes of identification: only the card, the card or PIN, the card and PIN, only PIN which are selected at setup of a control system of access depending on the required security level. At the same time, as well as the models ST-PR070MF, ST-PR170MF, Mifare the reader with the keyboard is supplied with the signal and sound light of acceptance of the Mifare code of cards that is convenient for informing the user on the status of the device.

Other advantage of devices of ST-PRx70 series is existence protected from moisture and dust of the body in compliance with class IP65 that allows to install these readers both in premises, and on the street. At the same time any Mifare the reader is efficient at temperatures from-30 to +60 °C and relative air humidity to 95%. Besides, high-strength plastic material of the body protects all Mifare of model from accidental or deliberate mechanical damages.

The compatibility of Mifare of ST-PR070MF, ST-PR170MF and ST-PR170MK devices with ACS controllers of different producers is provided with application in them the unified Wiegand interface thanks to which each Mifare the reader can be integrated into multibrand control systems of access easily. Moreover, unlike the similar devices using, for example, the iClass standard, new readers have lower cost at rather high level of security.