D-Link DSS-200G PoE Switch Series

Main Article: Network Switch

2023: DSS-200G-28MPP, DSS-200G-28MP, DSS-200G-10MPP, DSS-200G-10MP

On July 11, 2023, D-Link introduced a series of gigabit PoE DSS-200G switches for video surveillance systems (CCTV), IP telephony and corporate Wi-Fi networks. The models complement the line of customizable switches, as of July 2023, represented by DGS-1100V2 and DGS-1210/F series. The switches are designed for complex operating conditions and have a number of hardware and software capabilities that optimize the deployment and maintenance of modern video surveillance systems and networks with PoE.

DSS-200G

The main features of the DSS-200G switches are:

• 802.3bt PoE ports (up to 90W) - provide uninterrupted power to access points and video surveillance cameras with increased. energy consumption
• DIP switches - allow you to enable the most frequently used operating modes and functions without using the Web control interface:
  • Extend - for PoE range optimization up to 250 m,
  • PD-Alive - to restore the operation of frozen PoE equipment,
  • Isolate - to isolate PoE port traffic,
  • QoS - for traffic prioritization,
  • STP - for STP/RSTP connection protection.

• Scheduled PoE - Optimizes the cost of operating PoE equipment by flexibly configuring scenarios, such as enabling PoE devices only during business hours and shutting down at night.
• Fast PoE and Perpetual PoE - Provide continuous power during switch reboots and upgrades software.
• Lightning protection up to 6 kV on ports and power connector - allows you to protect the switch and the equipment connected to it from induced voltage caused by an electromagnetic pulse (lightning discharge, short circuit in the circuit of closely located 220/380V cables, etc.)
• Alarm signal port (RJ-45) - designed to connect external signaling devices that provide notification of overheating in the cabinet, opening the door, power outage and other potential threats.
• Auto Surveillance VLAN - Allows you to automatically recognize and add video surveillance equipment to a single VLAN with the highest service priority.
• Automatic detection of ONVIF devices - optimizes the deployment time of video surveillance systems based on equipment from different manufacturers.
• Fault Tolerance Enhancements - Includes support for cable diagnostics, LoopBack Detection, and ERPS technology to quickly reconnect when one of the lines in the ring fails.
• Web interface with Surveillance mode - designed for video surveillance tasks, allows you to track the number and types of connected equipment, port status, PoE power budgets (general, available, consumed by a specific port), manage devices in a group, perform system diagnostics, etc.

DSS-200G

For July 2023, the DSS-200G series is represented by the following models:

• DSS-200G-10MP - 8 ports 1000Base-T PoE (802.3af/at) and 2 ports 1000Base-X SFP, PoE budget 130W;
• DSS-200G-10MPP - 8 ports 1000Base-T PoE (802.3af/at/bt) and 2 ports 1000Base-X SFP, PoE budget 242 W;
• DSS-200G-28MP - 24 ports 1000Base-T PoE (802.3af/at) and 4 combo ports 1000Base-T/SFP, PoE budget 370 W;
• DSS-200G-28MPP - 16 ports 1000Base-T PoE (802.3af/at), 8 ports 1000Base-T PoE (802.3af/at/bt) and 4 combo ports 1000Base-T/SFP, PoE budget 518W.

Switches are available for ordering from official D-Link resellers. Recommended price for end users: DSS-200G-28MPP - $576, DSS-200G-28MP - $445, DSS-200G-10MPP - $288, DSS-200G-10MP - $215.