RSS
Логотип
Баннер в шапке 1
Баннер в шапке 2

Ricoh SP series Printers and MFP

Product
Developers: Ricoh (Rico Rus)
Last Release Date: 2018/05/14
Branches: Office equipment and office accessories
Technology: Office equipment

Content

2018: MFP SP C360SFNw, SP C360SNw, SP C361SFNw and SP C360DNw printer

On May 14, 2018 the Ricoh company announced release of models of A4 format for small offices — the color SP C360DNw laser printer and a line of the SP C360SFNw, SP C360SNw and SP C361SFNw MFP providing reliability, performance and low operating costs.

Ricoh SP C360DNw printer and SP C360SFNw MFP

According to information provided by Ricoh company, peak load of the MFP reaches 75,000 prints a month. To reduce even more the cost of operation, the MFP and the printer can be equipped with cartridges of the increased capacity up to 10,000 prints. Devices are capable to work with dense paper (from 56 to 220 g/m2) and save funds for printings of marketing materials — brochures, booklets, directories. Printing of banners up to 1260 mm long is possible.

Ricoh SP C360DNw printer

The company also noted a high print speed. Structures of Ricoh print the first page in 7.2 seconds. All machines are ready for printing right after inclusion. The printer or the Ricoh MFP in one minute is capable to print 28 pages in the bilateral mode in high quality (1200х1200 dpi).

Devices are placed on office table or in a niche that does not affect convenience of setup and replacement of supplies. To manage offices of Ricoh and to configure operation parameters it is possible by means of the color 7-inch touchpad based on the Android (at the printer — 4-inch) to which the intuitive menu is output. In couple of clicks on the screen it is possible to send the scanned documents for e-mail, to the network folder, to the USB carrier or to the SD card. Or at once in an electronic document management system: the SP C361SFNw model allows to print from a control panel from the Web browser and has ability to integrate with cloud applicaions of Ricoh, noted in the company.

To manage devices of Ricoh and to configure operation parameters it is possible by means of the touchpad

For connection to network in the provided devices there are a port Ethernet and the built-in module Wi-Fi. MFPs also support printing from memory cards of the SD format and modern standards of mobile printing, including Mopria, AirPrint and Google Cloud Print for access with smartphone and also connection with external devices under the protocol NFC and Wi Fi Direct.

Ricoh SP C360SFNw MFP

Models also offer speed bilateral copy and scanning of all document types – from ID cards to papers of A4 format using the slot in which document handling happens from two parties for one pass.

The SP C360DNw printer and the SP C360SFNw, SP C360SNw and SP C361SFNw MFP are available to buyers since April, 2018.

2017

Ricoh provided in Russia available printers and the MFP for office

At the beginning of 2017 the Ricoh company released on the Russian market new printers and the MFP for small offices and the small working groups. New products of the SP 220 and SP 325 series have a high print speed, good performance and ample communication opportunities.

SP 325SFNw Ricoh MFP and SP 220Nw printer

Series of printers and SP 220 MFP

The line of SP 220 consists of three devices. It is the SP 220Nw printer, the SP 220SNw and MFP MFP with the built-in SP 220SFNw fax.

All devices are executed in uniform style, have strict laconic design, at the same time they are rather compact: dimensions (WXHXD) make 402x293x360 mm for the MFP and 402x165x360 mm for the printer.

MFP and printer of Ricoh of the SP 220 series

Devices will perfectly fit into any office, and thanks to support of Wi-fi they can be placed in any point where there is an access to a corporate wireless network.

Also it should be noted a possibility of standard wire network connection (Ethernet) and support of technologies of mobile printing Apple AirPrint, Google Cloud Print (only for the MFP) and Mopria. The last will be especially useful to employees who store documents on mobile devices. They will be able to print easily necessary files directly from the gadget, thereby having released time for more important tasks. One more plus - the built-in module NFC. It allows to be connected by one contact to the printer or the MFP literally.

The application of Ricoh Smart Device Print&Scan will in addition facilitate life to users. It is available to iOS and Android. With its help it is possible to print, receive scanned copies directly on the gadget and many other things. In addition, the application has expanded security settings that is very relevant for office users.

The print speed of models of the 220th series makes up to 23 pages per minute - a good indicator, at the level of the majority of modern printers in this price category.

The starting cartridge which is delivered to allow to print together with the device about 700 pages in A4 format a standard cartridge is expected 1000 pages, it is also possible to purchase the expanded version capable without additional gas stations to provide printing about 2600 sheets A4.

MFPs of the SP 220 series are supplied with a panel with the monochrome LCD screen to which are brought the control button and the most demanded functions. Management is intuitive and should not cause difficulties in most of users. For speed copy and scanning of a large number of documents the MFP have an automatic feeder.

MFPs of the SP 220 series are supplied with a panel with the monochrome LCD screen

The copier in the MFP uses laser electrographic printing and is capable to create to 99 copies of the document with the resolution up to 600 x 600 dpi. Scaling of the image from 25% to 400% with a step to 1% is supported. The scanner works in permission of 600 dpi and can scan both monochrome, and color images.

Series of printers and SP 325 MFP

Three devices - the SP 325DNw printer,  MFP 3  in  1  -   SP 325SNw and MFP 4 in 1 (with the fax) - SP 325SFNw also standardly enter SP 325 line.

MFP and printer of the SP 325 series

In comparison with the 220th series of model of this line more massivna, however all of them are executed approximately in one design and have an identical black-and-white coloring. The printer weighing 13 kg has dimensions (WXHXD) of 376x262x392 mm. The MFP weighs already 17 kg, having at the same time and the big sizes - 405x405x392 mm.

Positioning of the 325th series in general same, as well as at a younger line is a small office, the small working group or the company. Nevertheless, opportunities are wider here.

And if the communication functions including concerning mobile printing in general repeat like those at the line of devices described above and on convenience of connection they should be at one level, then performance at the senior line is much more.

So, devices of the SP 325 series can brag of printing up to 28 pages per minute, at the same time time of an exit of the first print is about 8 seconds. The maximum monthly load on printers can make up to 35,000 prints, and share should last for 5 years of service or on 350,000 pages. Besides, these models support duplex printing that is important in some situations.

Complete with the device there is a starting cartridge expected approximately 1000 prints. It is also possible to find a standard cartridge which should be enough for printing of 3500 pages in sale, and expanded – for 6400 prints. Permission of printing can make from 600 x 600 to 1200 x 1200 DPI.

The MFP control panel by analogy with a younger line has the LCD screen and a set of buttons for all necessary actions.

Ricoh MFP control panel of the SP 325 series

SP 325SNw and SP 325SFNw MFPs can scan in the color mode with a speed up to 4.5 originals a minute and up to 13 originals a minute in the b/w mode. Besides, scanning of documents with automatic sending for e-mail, in the selected folder, on FTP and on the mobile device with installed application of Ricoh is supported. In addition, the reverse automatic feeder for high-speed scanning of a large number of pages is installed in these MFPs.

Modifications of SP 277 and SP 377

In addition in the SP series modifications 277 and 377 are available. Their main difference are starting cartridges of the increased capacity which are included in the starting delivery. In SP 277 it is a cartridge on 2600 prints, and in SP 377 – on 6400 prints. Purchase of these models will allow their owners to reduce the cost of a print and to save on supplies up to 35% for all service life of the device.

2016: Ricoh SP 3610SF

The Ricoh Aficio SP 3610SF MFP is intended for economic black-and-white printing, copying, scanning and the fax delivery.

On March 24, 2016 the Ricoh company announced release of Ricoh of SP 3610SF.

MFP laser Ricoh of SP 3610SF (2016)

The compact size allows to place the MFP directly on a desktop, and frontal access to the device facilitates service.

The SP 3610SF model is expected ensuring maximum efficiency and performance at simultaneous data of operating costs and energy consumption to a minimum.

In addition to cost reduction, SP 3610SF provides economy of space, combining a set of functions and opportunities in the compact body and will help you to increase productivity of work without damage to the environment.

Specific Features:

  • It is possible to limit a toner expense thanks to the "economy of a toner" function providing additional expense reduction
  • The compact design allows to place easily the device on office table
  • High quality of printing with the resolution of 1200×1200 dpi
  • Additional transmission function and acceptance of faxes
  • Full-color scanning with a speed of 6 originals of A4 format a minute

2015: Ricoh SP 6430DN

November 2, 2015. The Ricoh company released the compact monochrome printer of A3 format – Ricoh of SP 6430DN. The attractive price, low cost of a print and the lowest level of energy consumption in the class do the printer of Ricoh of SP 6430DN by universal model with low total cost of ownership.

Ricoh SP 6430DN, 2015

The monochrome printer of Ricoh of SP 6430DN prints with the resolution of 1200×1200 dpi with a speed of 38 pages per minute. The printer is ready to work already 16.6 seconds later after inclusion, and time of an exit of the first print is only 6.5 seconds — a record for devices of this class. Besides, the model supports automatic two-sided printing on dense paper.

For convenience the model of Ricoh of SP 6430DN is equipped with a big control panel with the four-lower case screen of high definition. Processes of stock replenishment of paper and replacement of supplies are most simplified thanks to full frontal access. Moreover, also the problem of sudden lack of paper in trays is solved: will inform on need of stock replenishment of the user the special indicator.

Ricoh of SP 6430DN is the ideal solution for small offices. This printer of A3 format practically does not exceed the sizes of the normal printer of A4 format. Thanks to the compact sizes it easily finds room on any desktop. The maximum reserve of paper for this model makes 2100 sheets, it is possible to set up to five trays. The device maintains peak loads to 150,000 prints a month. The Smart Device Print&Scan Ricoh software application provides convenient mobile printing from the connected smart devices and tablet computers.

The high-eco-friendly model of Ricoh of SP 6430DN has the lowest indicator of energy consumption among devices of the class — only 2.3 kvtch, and in sleep mode electricity consumption decreases to 1 W. The ECO Night Sensor sensor transfers the printer to sleep mode at nightfall, and function of the week timer provides additional economy of electricity.