BioSmart ACS

The biometric BioSmart systems are used for:

• Access restrictions to service premises
• Control of movement of employees on the building
• Automatic time recording of employees
• Settings and removals of premises from protection on a fingerprint
• Access restrictions to personal information (computers)
• Access restrictions to the classified information, confidential archives
• Automation of payment of a power supply at the enterprise - transition to non-cash payment, using biometric identification.

Applied separately or shared with smart cards, keys and signatures, systems can be applied practically all spheres of economy and private life.

2018

Certification on the EN 60839-11-1 standard

On November 6, 2018 the BioSmart company, the Czech representative office of Prosoft-Biometrics LLC, announced successful passing of certification tests according to the European EN 60839-11-1 standard. The quality certificate issued by the test center TRESOR TEST in Prague confirms that the line of BioSmart devices conforms to requirements to the equipment for control and management systems for access.

BioSmart noted that the EN 60839-11-1 standard imposes the most serious requirements to the security systems used for physical control and access control. It contains descriptions of theoretical model and system architecture, including the following criteria:

• the classification based on functionality and performance;
• requirements to interfaces of access points;
• requirements to indication and message (display, warning, record);
• signaling and neutralization of cracking of a system;
• requirements to identification;
• requirements to self-defense of systems;
• communication between components of a system of electronic control by access and other systems.

Besides, within the standard requirements to environmental conditions (use in the premises / in the open air) and electromagnetic compatibility and also test methods are designated. Were tested by the approved techniques including check of functionality of the software and hardware of the BioSmart system, electromagnetic compatibility tests according to IEC standard 61000-6-1 and expanded temperature tests.

As reported in BioSmart, certification tests were passed by the following devices:

1. the identification Terminal on veins of palms of PV-WTC.
2. UniPass Controller.
3. Reader of veins of palms and PV-WM Reader RFID cards.
4. the identification Terminal on WTC2 Terminal fingerprint.
5. Prox-E Controller.

According to the statement of BioSmart, advanced functionality and the high level of reliability of the equipment allow to implement solutions in the field of biometric control on the crucial objects requiring the strengthened protection.

ПО Biosmart-Studio v5.7.1

On June 26, 2018 the Prosoft-Biometrics company released upgraded version of the software of Biosmart-Studio v5.7.1 intended for management of the BioSmart ACS and creation of systems of accounting of working time. The updated mathematical models for procedures of biometric identification for palm veins entered a basis of development.

ПО Biosmart-Studio v5.7.1

According to the statement of the developer, the provided version of the program differs in the improved indicators of speed and stability of work. Also specialists added the following functionality:

• the updated identification algorithm on palm veins: identification speed on terminals is increased, the error FAR is reduced;
• the algorithm of quality evaluation of a template of veins of a palm developed on the basis of machine learning is added. Minimum admissible quality is set at the level of 45%;
• recording capability of biometric templates on the cards Mifare Classic, Mifare DESFire;
• display of the version of a firmware of the scanner of veins DCR-PV is added to the list of devices for scanning;
• synchronization of working schedules between 1C ZUP 3.1 and Biosmart-Studio v5 is implemented that allows to change calculation of the diagram of working time in 1C;
• the expanded status of "absences" for the unrationed working schedule;
• in working schedules the Consider Holidays parameter and the section of Check for control of employees is added to the set intervals;
• support of Czech is implemented;
• when installing Biosmart-Studio v5.7.1 converting of templates of veins of a palm in the current version of a mathematical model is executed.

Compliance to requirements of the Government of the Russian Federation

The Prosoft-Biometrics company received on January 22, 2018 the certificate of conformity of products to requirements of the 969th Order of the Government of the Russian Federation.

Prosoft-Biometrics received the certificate of conformity of the BioSmart ACS to requirements of the Government of the Russian Federation

Since 2017 according to government decree No. 969 of 9/26/2016 all objects of transport security, such as airports and railway stations, should be equipped only with the certified equipment for ensuring transport security conforming to all to requirements of the resolution.

The certificate received by the company confirms compliance of functional properties of all components of a biometric control and management system for access of BioSmart to requirements of the 969th Order of the Government of the Russian Federation.

According to the received certificate No. MVD RF.03.000023, the BioSmart system and its components correspond to points of Section III of Subparagraphs 8 – 10, 11 (and – r, r), 12 – 16 Resolutions 969 on the approval of requirements to functional properties of technical means of ensuring transport security.

The received certificate also certifies that the solutions BioSmart in the field of control and management systems for access, a time recording and information security can freely be applied on objects of transport infrastructure.

Expansion unit for "BOSS-personnel officer"

The companies "BOSS. Personnel systems" and Prosoft-Biometrics in January, 2018 announced the beginning of cooperation in creation of the joint solution based on control and management systems for access BioSmart and a time recording BioSmart-WorkTime.

The biometric systems of Prosoft-Biometrics offer several options of identification at choice as all ACS are equipped not only fingerprint scanners or the venous drawing of a palm, but also readers of proximity cards of a different format (RFID). Also biometric solutions allow to keep a time recording of employees. These parameters, as necessary, can be transferred to third-party programs for further use. The expansion unit for a personnel management system the BOSS-personnel officer will become such integration complex, told the companies. Read more here.