Eltex RR-Series Repiter

2022: Launch of RR-11 Reactors in Serial Production

On March 28, 2022, Eltex announced the launch of RR-11 repellers with support for EasyMesh technology into mass production. The RR-11 was a continuation of the Eltex retailer line, a development of the RR-10 junior model.

Eltex Repiter RR-11

RR-11 is designed to solve problems of insufficient coverage of the wireless home network. The farther the user from the AP, the weaker the signal level. It happens that distant rooms are left without access to the Internet at all. The retailer is designed to expand the Wi-Fi coverage area and eliminate the "dead" zones of the home network. RR-11 IEEE 802.11n/ac supports high transmission rates. data The use of MIMO technology and internal antennas makes the device a universal solution for expanding the home network, including providing high-quality media transmission. 4K content

RR-11 housing: plug for direct connection to electrical socket and Ethernet connector

The main difference between RR-11 and RR-10 is the housing with the ability to directly connect to the power outlet. The repiter in takes a minimum of space and will fit into any interior. The RR-11 provides a cable connector that enables the device to operate in standard access point mode .

The RR-11 is part of the EasyMesh Eltex line of devices, on the basis of which you can build self-optimizing and scalable seamless networks. The technology is also supported in the NTU-RG and RG 54th series routers.

Features of Wi-Fi technology EasyMesh:

• The technology allows you to combine routers and repiters into a single Wi-Fi network with a common network name and password.
• EasyMesh guarantees movement in the Wi-Fi coverage area without disconnecting the connection.
• Network Intelligence: A self-organizing and self-optimizing network collects information and responds to network conditions to maximize performance.
• Efficient load balancing allows devices to move to a better connection and avoid interference.

2020: Launch of RR-10 repellers in mass production

On May 7, 2020, Eltex announced the launch of the RR-10, a wireless signal retailer, into mass production. The devices are designed to expand the coverage area of ​ ​ wireless networks and amplify the Wi-Fi signal.

As of May, the equipment is included in the register of MSW of domestic production (Order of the Ministry of Industry and Trade of the Russian Federation No. 2251) and is equipped with Wi-Fi EasyMesh support - technology for building a scalable and productive wireless network. Thanks to EasyMesh Wi-Fi, customers balance between network nodes, increasing throughput.

2019: RR-10 Repiter Announcement

On September 24, 2019, ELTEX introduced universal wireless signal repeaters.

According to the company, RR-10 is a wireless signal retailer designed to expand the coverage area of ​ ​ wireless networks and amplify the Wi-Fi signal. The ELTEX solution eliminates "dead" wireless areas in private homes, multi-room apartments, and small offices.

Solution Capabilities:

• High transfer rates data due to standards/ IEEE 802.11nac
• Interfacing with third-party devices
• Increase Data Link Bandwidth with MIMO 2x2 Technology

Subsequently, the RR-10 provides support for Wi-Fi EasyMesh. The technology allows you to build the most productive wireless network: devices themselves move to a better connection and avoid interference. In addition, a network based on Wi-Fi EasyMesh devices allows you to add access points from several vendors, which solves the problem of compatibility of network equipment.