BIM technologies for information modeling in Moscow

The main articles are:

• BIM technologies (Russian market)
• Digitalization of Moscow

2019

Moscow will switch to BIM in the design of state order facilities

The city authorities will switch to the use of BIM in the design of state order facilities in three stages by the end of 2019. Mikhail Kosarev, head of the department for introducing information modeling technologies of the Moscow Construction Department, spoke about this in December 2019. ^[1].

According to Kosarev, already now Moscow requires the use of BIM technologies in the design of apartment buildings, social infrastructure (kindergartens, schools, clinics) and administrative and business complexes. However, so far there are a number of restrictions. In particular, the ACS created in BIM should not include more than two buildings with a total area of ​ ​ no more than 50 thousand square meters. m. There are also restrictions on the area of ​ ​ built-in parking (if any) - no more than 15 thousand square meters. m.

The second stage of the transition to BIM is scheduled for July 1, 2020. From this date, the city will begin to require the use of information modeling in the design of fire stations, police stations. Also, the BIM-objects will include the area office of the engineering infrastructure. These are pump and compressor stations, local treatment facilities, gas control points, heat points, transformer and distribution points.

The third stage is scheduled for September 1, 2020. The city authorities will also include in their requirements BIM-design of road network facilities and all engineering networks. Finally, from January 1, 2021, linear metro facilities and transport hubs will also be added to this list.

The design of "kennels" will be transferred to BIM in three years

Houses for immigrants as part of the renovation of the housing stock of Moscow ("Sobyaninki") will be designed according to BIM technologies in the very near future. This was stated by the head of the capital's construction complex Marat Khusnullin, Interfax writes. "Such technologies will begin to be used as part of the renovation program in the near future. And within two to three years, the entire volume of new housing will be created according to information modeling standards, "the deputy mayor said.

"We set the task to develop BIM technologies and widely apply them in our work. The renovation program can push designers to wider implementation, "Khusnullin added. The head of the construction complex has already announced plans to introduce information modeling technologies in the design of "coworkers" in mid-May. According to him, the use of BIM will reduce the time and cost of such work

An additional 15 thousand designers will be involved in the implementation of the renovation program for the housing stock of Moscow, Khusnullin previously reported. The construction complex of the city plans to find such specialists in the capital itself, the deputy mayor said at the end of May in an interview with the Dozhd TV channel. Marat Khusnullin did not disclose the requirements for their qualifications (including regarding design at BIM) then.

Moscow has decided on the timing of the launch of pilot projects in BIM

Pilot projects using BIM technologies are planned to be launched in Moscow in the next three years. About this in an interview ^[2] the magazine "Russian Construction Complex" said the chairman of Moskomexpertiza Valery Leonov^[3].

"If we talk about the short term, a number of regulations and requirements will be developed that take into account the specifics of the capital, which will make it possible to take the first steps to introduce new technology. For 2017-2019, it is planned to launch "pilot" projects - capital construction facilities - in order to develop the use of technology for capital construction facilities, "the official said

Now the efforts of the department are concentrated on the development of a standard for the use of BIM technologies at Moscow construction sites. In the near future, according to Leonov, a number of regulations and requirements will be developed that take into account the specifics of the capital's construction complex. After the newly-made standard is tested at real facilities, it can be recommended for use in the regions, which, in turn, will create a single state standard for BIM in Russia, the head of Moskomexpertiza concluded.

In his opinion, only by completely transferring the state order to BIM, it will be possible to create conditions for the full and effective use of this technology by all industry participants. "The practice of working together with designers and developers shows that the most advanced of them have already invested in the introduction of this technology, with the prospect of increasing their competitiveness in the market. But they cannot fully (with all the advantages) use the technology, since the state customer works slightly differently, "Leonov explained.

2018: BIM technologies will begin to be taught at colleges in Moscow

Future modern designers and architects no longer have enough ordinary kulman and paper drawings. In the last decade, all designers have switched to using computer programs. They allow you to translate into reality any wishes of the customer, apply new directions in building design, interior decoration, landscape design.

BIM technologies, virtual reality helmets and 3D printers will appear at the Moscow College of Architecture and Urban Planning in the academic year 2018-2019. This was announced in May 2018 by the supplier portal, operated by the Moscow City Department for Competition Policy.

{{quote 'The innovative approach will provide students with engineering and technical directions to develop project thinking, said Alexander Arionchik, director of GBPEI MKAG - Moscow College of Architecture and Urban Planning.

"The presence of a 3D modeling and prototyping laboratory in a modern Moscow college allows you to achieve results at each stage of training. The involvement of students in the process makes it possible to effectively master new technologies and software products (specialized CAD programs) for modeling, design and design, carry out individual and group projects, conduct effective preparations for technical olympiads and competitions, and easily integrate into innovative approaches to training, "the college director said.}}

2017

Moscow will transfer construction expertise to BIM from 2019

Moscow has been transferring city structures of construction expertise to information modeling technologies since the beginning of 2019. This was stated in November 2017 by Deputy Mayor Marat Khusnullin, the portal of the capital's construction complex reported. "We have decided that from 2019 we will move on to expertise on BIM technologies. Money has already been allocated for this, "he said. The head of the capital's construction complex added that the transition will be an experiment for the city. All necessary funding is provided for in the budget of Moscow.

In mid-October, it was reported that the city authorities approved a "roadmap" for the introduction of BIM technologies in the construction complex. The document detailed the stages of "full-format preparation for the use of BIM" until the beginning of 2019. Moskomexpertiza has been appointed the coordinator of the plan implementation.

"The plan creates a detailed algorithm for working in this direction. We tried to provide for all the necessary measures: from the creation of a project office in the structure of the construction complex to the development of classifiers of information modeling and requirements at the design and examination stages, "commented the head of the department Valery Leonov

BIM technology implementation plan approved in Moscow

In October 2017 To Moscow , the Plan for the implementation BIM technologies of the Moscow Construction Complex was approved. The plan, which involves full-format preparation for the use Moscow of information modeling technology by the Construction Complex (TIM, or the English-language analogue -) BIM by 2019, was approved by the Deputy Mayor of Moscow in the Government of Moscow on urban planning policy and construction M.Sh. Khusnullin. This was told by the chairman Moscow Committee for Pricing Policy in Construction and State Project Inspection Valery Leonov, whose department was appointed coordinator of the implementation of the Plan.

"Moscow's exceptional role in BIM implementation has already made the capital a" pilot "implementation region, and the approved Plan creates a detailed algorithm for work in this area. We tried to provide for all the necessary measures - from the creation of a Project Office in the structure of the Construction Complex to the development of classifiers of information modeling and requirements at the design and examination stages, "Valery Leonov said

The plan distributes and supplements the provisions of the "road map" of the Ministry of Construction of Russia, approved to work out the implementation of BIM technology at the federal level. The document for Moscow covers the period of work until December 2018, and during this time its implementation will create a regulatory framework for the use of technology at the main stages of the implementation of civil construction projects, train existing personnel to work with new technology and related software, as well as check the functioning of BIM on "pilot" projects of the capital region.

Notes